In this article, aspects related to A319 (AlSi5Cu3) and A356 (AlSi7Mg) alloy are covered
owing to their prominent role in the automotive and aerospace industries. It is important to …

The microstructure and tensile properties of Al–Si–Cu–Mg alloys with different Cu contents
and Cu/Mg ratios were investigated. The results show that the Mg 2 Si, θ-Al 2 Cu and Q-type …

The influence of variations in pH and time on the bimetallic corrosion of π-Al 8 Mg 3 FeSi 6
phase and pure aluminum in acidic, neutral and basic solutions has been evaluated by …

Additive manufacturing processes are becoming attractive technologies for producing
complex components in relatively a short time and at reasonable cost. The present study …

This study focuses on primary impurities, called intermetallics, in the microstructure of Al-Si-
X alloys, their formation, effects and treatments to eliminate or ameliorate their deleterious …

The effects of Ce and/or Mg on the microstructure and tensile properties of Al-Si-Mg-Fe
alloys have been systematically investigated. Results showed that the separate addition of …

Abstract Al–Si–Cu–Mg foundry alloys are used in casting process technologies. However,
their strength properties remain low due to their microstructural characteristics and porosity …

Exfoliating graphite to graphene nanosheets by mechanical ball milling with alumina,
coating alumina particles with graphene layers to enhance their electrical and thermal …

The paper presents the results of tests of rapid solidification (RS) aluminum alloys with the
addition of silicon (5%, 11%, and 20%). Casting by melt-spinning on the surface of an …

Metal casting has become increasingly significant in the manufacture of industrial
components. Aluminium alloys have become a typical metal casting material due to their …