AISI 410 martensitic stainless steel (MSS) coatings, reinforced with TiC ceramic particles of
varying contents (0, 5%, 10% and 15%), have been fabricated by laser cladding technology …

Low-activation vanadium alloys, with the reference composition of V–4Cr–4Ti have been
considered as one of the most promising candidate materials for structural components such …

Nanoindentation measurements were obtained on eight commercially-produced DP980
dual-phase steels to quantify the hardness of the individual constituents, ferrite and …

High strength and ductility and vehicle's weight reduction are key issues for improving fuel
efficiency in automotive industries. In addition, structural reinforcement components require …

Abstract High-strength Al-Zn-Mg-Cu alloys such as AA7075 have drawn considerable
attention and interest from both industry and academia owing to their high-specific strengths …

An innovative approach to build a high-performance, thermally stable Al-8Ce-10Mg (wt.%)
alloy via friction-stir based solid-state additive manufacturing, called additive friction stir …

Oxide dispersion strengthened (ODS) high entropy alloys (HEAs) are potential structural
materials for advanced nuclear reactor application due to their excellent radiation tolerance …

Orowan strengthening is a key strengthening method for metallic materials. However, a
debate still exists on the effect of temperature on the Orowan strengthening mechanism …

Alloys of copper (Cu) and zirconium (Zr) were generated by mechanical alloying via
cryogenic, high-energy ball milling and then annealed to a maximum temperature of 1000° …

Premature failure of rail and bearing steels by White-Etching-Cracks leads to severe
economic losses. This failure mechanism is associated with microstructure decomposition …