Nanoindentation for probing the mechanical behavior of molecular crystals–a review of the technique and how to use it
U Ramamurty, J Jang - CrystEngComm, 2014 - pubs.rsc.org
Nanoindentation is a technique which can be used to measure the mechanical properties of
materials with high precision, even when they are only available in small quantities. As a …
materials with high precision, even when they are only available in small quantities. As a …
Hierarchical precipitates, sequential deformation-induced phase transformation, and enhanced back stress strengthening of the micro-alloyed high entropy alloy
We report the annealing time-dependent microstructures and deformation mechanisms of
the novel face-centered cubic Fe 49.5 Mn 30 Co 10 Cr 10 C 0.2 Ti 0.1 V 0.1 Mo 0.1 HEA …
the novel face-centered cubic Fe 49.5 Mn 30 Co 10 Cr 10 C 0.2 Ti 0.1 V 0.1 Mo 0.1 HEA …
Nano‐and Micro‐Mechanical Properties of Ultrafine‐Grained Materials Processed by Severe Plastic Deformation Techniques
The processing of bulk metals through the application of severe plastic deformation (SPD)
provides the potential for achieving exceptional grain refinement leading to ultrafine‐grained …
provides the potential for achieving exceptional grain refinement leading to ultrafine‐grained …
Mechanism for material removal in diamond turning of reaction-bonded silicon carbide
J Yan, Z Zhang, T Kuriyagawa - International Journal of Machine Tools and …, 2009 - Elsevier
Reaction-bonded silicon carbide (RB-SiC) is a new ceramic material that has extremely high
strength and hardness. Diamond turning experiments were performed on RB-SiC to …
strength and hardness. Diamond turning experiments were performed on RB-SiC to …
Nanomechanical behavior and structural stability of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
A CoCrFeNiMn high-entropy alloy (HEA), in the form of a face-centered cubic (fcc) solid
solution, was processed by high-pressure torsion (HPT) to produce a nanocrystalline (nc) …
solution, was processed by high-pressure torsion (HPT) to produce a nanocrystalline (nc) …
Determining individual phase properties in a multi-phase Q&P steel using multi-scale indentation tests
A new inverse method was developed to predict the stress–strain behaviors of constituent
phases in a multi-phase steel using the load–depth curves measured in nanoindentation …
phases in a multi-phase steel using the load–depth curves measured in nanoindentation …
Annealing effect on plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A nanomechanical analysis
The influence of annealing on the constitutive stress-strain response of nanocrystalline (nc)
CoCrFeMnNi high-entropy alloy (HEA) was investigated through a series of nanoindentation …
CoCrFeMnNi high-entropy alloy (HEA) was investigated through a series of nanoindentation …
Fracture toughness of silicon nitride thin films of different thicknesses as measured by bulge tests
A bulge test setup was used to determine the fracture toughness of amorphous low-pressure
chemical vapor deposited (LPCVD) silicon nitride films with various thicknesses in the range …
chemical vapor deposited (LPCVD) silicon nitride films with various thicknesses in the range …
Heterogeneous grain size and enhanced hardness by precipitation of the BCC particles in medium entropy Fe–Ni–Cr alloys
We report the chemical-composition-dependent precipitation of Cr-rich BCC particles and
their role in the hardening of Fe–Cr–Ni medium entropy alloys (MEAs). Three alloys with …
their role in the hardening of Fe–Cr–Ni medium entropy alloys (MEAs). Three alloys with …
Fabrication of nanocomposites through diffusion bonding under high-pressure torsion
This report summarizes a recent study demonstrating simple and rapid synthesis of a new Al–
Mg alloy system and ultimately synthesizing a metal matrix nanocomposite, which was …
Mg alloy system and ultimately synthesizing a metal matrix nanocomposite, which was …