The development and testing of a new method of qualitative analysis of the microstructure quality, for example of steel AISI 321 subjected to radial shear rolling
The work is devoted to the problem of quantitative evaluation of the microstructure on the
example of work with the TEM study of ultrafine-grained (UFG) austenitic steel for use in …
example of work with the TEM study of ultrafine-grained (UFG) austenitic steel for use in …
The effect of radial-shear rolling on microstructure and mechanical properties of stainless austenitic steel AISI-321
Improving the quality of metal products by crushing of the microstructure of material is one of
the promising areas of modern metallurgy. The basic idea consists in refinement the grain …
the promising areas of modern metallurgy. The basic idea consists in refinement the grain …
Experimental studies on Zr-1% Nb alloy properties in technological conditions of cold pilger tube rolling process
H Dyja, A Kawałek, K Ozhmegov - Archives of Civil and Mechanical …, 2019 - Springer
The paper presents the results of research on the rheological properties of the Zr-1% Nb
alloy, obtained for the strain parameters corresponding to the cold rolling tube process in a …
alloy, obtained for the strain parameters corresponding to the cold rolling tube process in a …
The effect of radial-shear rolling on the microstructure and mechanical properties of technical titanium
AB Naizabekov, SN Lezhnev, AS Arbuz - Solid State Phenomena, 2020 - Trans Tech Publ
Improving the quality of hardware through the improvement of the microstructure is one of
the main trends of modern metallurgy. This approach allows us to achieve special properties …
the main trends of modern metallurgy. This approach allows us to achieve special properties …
The Effect of Radial-Shear Rolling Deformation Processing on the Structure and Properties of Zr-2.5 Nb Alloy
K Ozhmegov, A Kawalek, A Naizabekov, E Panin… - Materials, 2023 - mdpi.com
The rheological properties of the Zr-2.5 Nb alloy by the strain rate range of 0.5–15 s− 1 and
by the temperature range of 20–770° C was studied. The dilatometric method for phase …
by the temperature range of 20–770° C was studied. The dilatometric method for phase …
[PDF][PDF] The Study of the Effect of Alternate Intermittent Deformation on the Bauschinger Effect in a Zirconium-Based Alloy
H Dyja, A Kawałek, K Ozhmegov… - Archives of Metallurgy …, 2019 - bibliotekanauki.pl
The article reports the results of research on the influence of the alternate intermittent
deformation of specimens by a torsion method on the Bauschinger effect in the Zr-1% Nb …
deformation of specimens by a torsion method on the Bauschinger effect in the Zr-1% Nb …