In situ composite manufacture is an approach to improve interfacial adhesion between
matrix and reinforcements, in which reinforcements are synthesized along composite …

Bulk Al–Ni intermetallic composites were synthesized in situ by Friction Stir Processing
(FSP) at Al alloy plate with Ni powder. The microstructures and compositions of the …

The influence of reinforcing AlN, AlB 2 and BN phases, either individually or in combination,
on the mechanical properties of Al-based composites fabricated via reactive ball milling of …

Hybrid aluminum composites are fabricated in a novel manner to characteristically induce a
layer‐wise aligned distribution of micro‐scale Al3Ni and Al3Ti intermetallic particles that are …

In the present study, pulse echo overlap method (PEO) has been used as a non-destructive
technique for evaluating the mechanical properties of Al/SiC nanocomposites. The nano …

In this work, an attempt was made to synthesize Al 2 O 3/Al 3 Ni hybrid reinforcement
particles in Al-matrix to fabricate an AMC using stir casting technique. The molten metal was …

Three different in-situ Aluminum matrix composites (AMCs) were synthesized by mechanical
thermal process via powder metallurgy route from Al–B 2 O 3–TiO 2 system, where the B 2 O …

This work was devoted to the development of NiAl–matrix composite and its production by
reactive sintering powder metallurgy. Various types of reinforcement (aluminium oxide …

Nickel powders were troweled on roughened Al base plate using a friction tool made from
tool steel. Friction stir processing (FSP) was carried out using a load of 8 kN and with a tool …

Modern industrial applications require materials with special surface properties such as high
hardness, wear and corrosion resistance. The performance of material surface under wear …