Over the past few decades, titanium (Ti) alloys containing fully or mostly body-centred cubic
β phase in metastable state have received considerable interest due to their elevated …

The variant graph is a new, hybrid algorithm that combines the strengths of established
global grain graph and local neighbor level voting approaches, while alleviating their …

Increasing strength and preserving high strain hardening rate are of importance to widen the
application of the metastable β titanium alloys. In this study, Ti–4Mo–4Cr–3Al–2Nb–1.2 V …

A bidirectional powder deposition strategy was employed to additively manufacture Ti-15Mo
wt% using laser metal deposition. Phase identification, elemental analysis and …

Martensitic transitions as a function of cold rolling strain levels, in the range of 5–43%, in the
solution treated condition of metastable β Ti-10V-2Fe-3Al (Ti-1023) alloy has been …

This review summarizes the current knowledge on the α ″martensite transformation in
metastable β Ti alloys under different stress state conditions gained using various in situ …

A strain-transformable microstructure was successfully designed in a metastable β Ti–7Mo–
3Nb–3Cr–3Al alloy with enhanced mechanical properties, by introducing∼ 28% α …

To meet the demands of both processing and serving, to the best of our knowledge, this is
the first report exhibiting large range control of the yield ratio from 0.31 to 0.96 with decent …

Laser powder bed fusion (LBPF) was employed to fabricate a strain-transformable β-Ti alloy,
Ti-10V-2Fe-3Al (wt%). While the alloy is known to exhibit transformation induced plasticity …

Abstract The Ti-20Zr-3Mo-3Sn (at.%) alloy is investigated before and after deformation by
conventional and cyclic tensile tests, electron back-scattered diffraction (EBSD), in situ …