Three different percentages of carbon nanotubes (CNTs)(0.1%, 0.5%, and 1% by mass of
asphalt cement) were used to modify conventional asphalt cement (60/70) in this study …

Recently, the batch production of styrene–butadienestyrene (SBS) modified asphalt has
been realized, but quality control is still in the empirical stage. While the chemical reaction …

Due to the introduction of secondary materials, the asphalt mixtures to be designed and
tested in our laboratories are constantly becoming much more complex than traditional …

The composite modification method helped improve the viscoelastic properties, aging
resistance, and high and low-temperature resistance of asphalt. In this paper, organic …

The performance of styrene–butadiene–styrene modified asphalt (SBSMA) is strongly
affected by the composition of asphalt. In this study, five kinds of bitumens were selected …

This manuscript reports on two Styrene-Butadiene-Styrene (SBS) polymeric molecular
chains so-called 1101AT and D0243, used to modify a 50/70 pen grade neat asphalt binder …

Styrene-butadiene-styrene (SBS) is currently the most widely used asphalt modifier.
However, high-SBS-concentration high-viscosity modified asphalts (HVMA) are …

To solve the problem of poor modification effect caused by insufficient swelling of SBS
modifier in asphalt mixture under dry modification mode, the crosslinking reaction among bio …

The utilization of nanomaterials in the field of binder materials for road paving has attracted
researchers' attention in recent years. This study presented the performance properties of a …

Morocco is getting into the circular economy and wants to increase its overall recycling rate
from 5% to more than 20%. Today we find that plastic waste production reaches the level of …