The effect of Zn or Zn+ Cu addition on the precipitation in Al–Mg–Si alloys is summarized
and analyzed by analyzing DSC curves, aging strengthening curves, and precipitates, which …

Additively manufactured (AM) aluminium alloys have attracted increasing attention due to
the great demand of prototyping, spare parts supply, short run productions and further light …

In the current work, a novel complex concentrated aluminum alloy is designed and studied.
In order to investigate the unknown region of the multicomponent phase diagrams, thermo …

High as-cast strength die-cast AlSi9Cu2Mg alloy was achieved with industrially acceptable
ductility, via the addition of titanium diboride nanoparticles. The main intermetallic …

The microstructure and mechanical properties of the high-pressure die casting alloys Al-5.7
Mg-2.6 Si-0.7 Mn-xZn in as-cast condition have been investigated. The microstructure was …

Abstract The Al-11.0 Mg-2.6 Si-4.0 Zn-0.6 Mn (wt%) alloy is a new developed high strength
die cast alloy which can be used for structural parts in the automotive and aerospace …

In the present work, a novel low-temperature heat-treatable recycled die-cast Al–Mg alloy
was developed by adding Zn into non-heat-treatable Al–5Mg–1.5 Fe–0.5 Mn alloy. The …

The microstructure and mechanical properties of Al-5.7 Mg-2.6 Si-0.7 Mn-xZn high-pressure
die casting alloys after heat treatment have been investigated. The microstructure was …

In this research paper, the effect of the addition of copper (0.02 to 3.32 wt.%) on
microstructure, mechanical and thermal properties of Al-Zn-Mg alloy are studied using an …

Metal matrix composites (MMCs), renowned for their lightweight and exceptional mechanical
properties, are currently in high demand. Herein, carbon fiber‑aluminum metal matrix …