SnO2: A comprehensive review on structures and gas sensors
S Das, V Jayaraman - Progress in Materials Science, 2014 - Elsevier
Metal oxides possess exceptional potential as base materials in emerging technologies. In
recent times, significant amount of research works is carried out on these materials to assess …
recent times, significant amount of research works is carried out on these materials to assess …
Highly efficient electrochemical degradation of perfluorooctanoic acid (PFOA) by F-doped Ti/SnO2 electrode
B Yang, C Jiang, G Yu, Q Zhuo, S Deng, J Wu… - Journal of hazardous …, 2015 - Elsevier
The novel F-doped Ti/SnO 2 electrode prepared by SnF 4 as the single-source precursor
was used for electrochemical degradation of aqueous perfluorooctanoic acid (PFOA) …
was used for electrochemical degradation of aqueous perfluorooctanoic acid (PFOA) …
Fluorine doped (Ir, Sn, Nb) O2 anode electro-catalyst for oxygen evolution via PEM based water electrolysis
K Kadakia, MK Datta, OI Velikokhatnyi… - International Journal of …, 2014 - Elsevier
A solid solution of fluorine combined with IrO 2, SnO 2 and NbO 2, denoted as (Ir, Sn, Nb) O
2: F, corresponding to composition (Ir 0.30 Sn 0.35 Nb 0.35) O 2: x wt.% F, where x ranges …
2: F, corresponding to composition (Ir 0.30 Sn 0.35 Nb 0.35) O 2: x wt.% F, where x ranges …
Optical transitions and point defects in F: SnO2 films: Effect of annealing
F El Akkad, TAP Paulose - Applied surface science, 2014 - Elsevier
FTO films were deposited on borosilicate glass using chemical spray pyrolysis at 450° C
then subjected to post deposition annealing in air at 500, 550 and 600° C. The films are …
then subjected to post deposition annealing in air at 500, 550 and 600° C. The films are …
Roughness-based monitoring of transparency and conductivity in boron-doped ZnO thin films prepared by spray pyrolysis
Sprayed polycrystalline ZnO and boron-doped ZnO thin films composed of spherical grains
of 25–32nm in diameters are used in roughness measurement and further correlated with …
of 25–32nm in diameters are used in roughness measurement and further correlated with …
Evaluation of an Nd doping effect on characteristic properties of tin oxide
In the present work, transparent and conductive Nd doped SnO 2 thin films were deposited
via spray pyrolysis. Crystallographic, morphological, optical and electrical characterizations …
via spray pyrolysis. Crystallographic, morphological, optical and electrical characterizations …
Ab-initio study of fluorine-doped tin dioxide: A prospective catalyst support for water electrolysis
OI Velikokhatnyi, PN Kumta - Physica B: Condensed Matter, 2011 - Elsevier
In an attempt to identify new electrochemically stable catalyst supports for electrolysis of
water, the electronic structure of SnO2 doped with different fluorine concentrations has been …
water, the electronic structure of SnO2 doped with different fluorine concentrations has been …
Physicochemical characterization of point defects in fluorine doped tin oxide films
FE Akkad, S Joseph - Journal of Applied Physics, 2012 - pubs.aip.org
The physical and chemical properties of spray deposited FTO films are studied using
FESEM, x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), electrical and …
FESEM, x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), electrical and …
Electrostatic spray pyrolysis of LiNi0. 5Mn1. 5O4 films for 3D Li-ion microbatteries
U Lafont, A Anastasopol, E Garcia-Tamayo, E Kelder - Thin Solid Films, 2012 - Elsevier
Electrostatic spray pyrolysis has been used to produce high voltage LiNi0. 5Mn1. 5O4 thin
film electrodes for 3D Li-ion microbattery application. The influence of the synthesis …
film electrodes for 3D Li-ion microbattery application. The influence of the synthesis …
Characteristic evaluation on spray-deposited WFTO thin films as a function of W doping ratio
In this work, F and F+ W simultaneously doped SnO 2 highly transparent conducting thin
films were deposited on glass substrates at (500±5)° C temperature by the spray pyrolysis …
films were deposited on glass substrates at (500±5)° C temperature by the spray pyrolysis …