This review focuses on important stability issues facing amine-functionalized CO2
adsorbents, including amine-grafted and amine-impregnated silicas, zeolites, metal–organic …

Photocatalysis is a classical solution to energy conversion and environmental pollution
control problems. In photocatalysis, the development and exploration of new visible light …

To enhance personalized diabetes management, there is a critical need for non-invasive
wearable electrochemical sensors made from flexible materials to enable continuous …

In this work, amine-impregnated activated carbon was prepared from oil sands coke, for use
in CO2 capture. Delayed oil sands coke was activated using microwave heating and KOH as …

Four commercial activated carbons with different chemical and textural characteristics were
modified by gamma irradiation under five different conditions: irradiated in absence of water …

MnO 2 loaded on activated carbon fibers (MnO 2@ ACF) were successfully prepared using
co-precipitation methods, the as-prepared MnO 2@ ACF were characterized by scanning …

This study aims to evaluate the NO 2 adsorption capacities of activated carbons prepared by
physical and chemical activation of date pits and to compare them with modified …

The objective of this study is to determine the contribution of surface oxygen groups to
irreversible adsorption (aka heel formation) during cyclic adsorption/regeneration of organic …

A low cost and locally available material, Lemna minor, was used to fabricate activated
carbon using H 3 PO 4 activation. After H 3 PO 4 activation, the L. minor activated carbons …

The catalytic oxidation of NO to NO2 at ambient temperatures has been a promising route for
controlling NO emissions, since NO2 is subsequently removed as nitric acid in the presence …