The construction industry is one of the largest CO 2 emitters worldwide. This review outlines
all existing CO 2 capture technologies in the construction-related industry which are mainly …

This paper presents feasibility and benefits of utilizing off-specification fly ash (OSFA), which
would have otherwise been landfilled, in preparing ultra-high-performance concrete …

A laboratory pH-dependent batch water leach tests were conducted to investigate the
leaching behavior of Al, Zn, Cr, Cu, Fe and Mn from soil–fly ash mixtures used in highway …

The use of industrial by-products such as fly ash and slag have become very prevalent in
soil stabilization owing to its suitable physical and mechanical properties, and economical …

Abstract Leaching behaviors of Arsenic (As), Barium (Ba), Calcium (Ca), Cadmium (Cd),
Magnesium (Mg), Selenium (Se), and Strontium (Sr) from soil alone, coal fly ash alone, and …

Heavy metal contamination in soils can pose severe challenges to the safety of geotechnical
engineering projects. Loess, which is widely distributed in Northwest China, is a preferred …

Fly ash is an industrial waste material that is repurposed as a soil stabiliser worldwide. In
Thailand, many ground improvement projects utilise mixtures of cement and fly ash to …

Inclusion of cement in fly ash and slag mixed soils could potentially alter the leaching
behavior of elements. This study investigated the leaching characteristics of calcium (Ca) …

In this study, novel supplementary cementitious materials (SCMs) were produced by the
mixed calcination of secondary aluminium dross and dolomite. The thermal activation effect …

Laboratory scale tests were conducted to assess the efficiency of two different types of waste
materials to remediate acid mine drainage (AMD). The waste materials used in the current …