Optimal dead-time setting and loss analysis for GaN-based voltage source converter

P Williford, EA Jones, Z Yang, J Chen… - 2018 IEEE Energy …, 2018 - ieeexplore.ieee.org
The dead-time in voltage source converters can have significant impact on power quality
and efficiency, and because these losses scale proportionally with switching frequency, it is …

A novel PWM modulation and hybrid control scheme for grid-connected unipolar inverters

Z Guo, F Kurokawa - 2011 Twenty-Sixth Annual IEEE Applied …, 2011 - ieeexplore.ieee.org
The purpose of this paper is to provide low cost, high power quality and high efficiency
solutions for grid-connected inverters. Compared with bipolar switched inverters, unipolar …

Dead-time compensation method of SVPWM based on DSP

LQ Zhou - 2009 4th IEEE Conference on Industrial Electronics …, 2009 - ieeexplore.ieee.org
In direct torque control and vector control, the voltage source inverter (VSI) was controlled
based on Space-vector pulse width modulation (SVPWM). The SVPWM is an excellent …

Control and PWM modulation scheme for dead-time compensation of CVCF inverters

Z Guo, F Kurokawa - INTELEC 2009-31st International …, 2009 - ieeexplore.ieee.org
The switching dead-time necessary in PWM inverters results in output distortions, and
deteriorates the utilization of dc-link voltage. To solve these problems, the authors have …

Compensation of nonlinear effects in three-level neutral-point-clamped inverters based on field oriented control

H Meşe, A Ersak - … and Motion Control Conference (EPE/PEMC …, 2012 - ieeexplore.ieee.org
In this paper, the nonlinear effects in three-level neutral-point-clamped inverters will be
studied and a compensation algorithm, based on field oriented control (FOC) technique, will …

Study of a novel dead-time compensation method for SVPWM

L Mao, X Wang, R Na, Y Cao - Proceedings of 2011 6th …, 2011 - ieeexplore.ieee.org
The dead-time effect in a three-phase voltage source inverter can result in voltage losses,
current waveforms distortion and torque pulsation. In order to improve the current waveforms …

A new hybrid current control scheme for dead time compensation of inverters with LC filter

Z Guo, F Kurokawa - 2009 13th European Conference on …, 2009 - ieeexplore.ieee.org
This paper presents a new hybrid current control scheme for dead-time compensations and
power density optimization of grid-connected dc/ac inverter. A sliding mode controller is …

Elektrikli ve seri hibrit elektrikli araçlarda simülatör kullanarak kalıcı mıknatıslı senkron tahrik motoru kontrolü

MA Çimen - 2010 - polen.itu.edu.tr
Özet Fosil yakıt kaynaklarının tükeniyor olması ve buna bağlı petrol fiyatlarının artışı
ulaşımda mevcut teknolojilerin verimliliğinin artırılması çalışmalarının hız kazanmasına ve …

A new dead-time compensation method on direct torque control system based on DSP

LQ Zhou - 2009 4th IEEE Conference on Industrial Electronics …, 2009 - ieeexplore.ieee.org
In direct torque control, the voltage source inverter (VSI) was controlled based on Space-
vector pulse width modulation (SVPWM). The SVPWM is an excellent control strategy, but …

Improved torque and speed control performance in a vector-controlled PWM-VSI fed surface-mounted PMSM drive with conventional PI controllers

Ü Büyükkeleş - 2012 - open.metu.edu.tr
In this thesis, high performance torque and speed control for a surface-mounted permanent
magnet synchronous machine (PMSM) is designed, simulated and implemented. A three …