[HTML][HTML] Influence of parameters and regimes of the electrodeposition on hardness of copper coatings
IO Mladenović, ND Nikolić - Metals, 2023 - mdpi.com
Correlation among morphological, structural and hardness characteristics of
electrodeposited copper coatings is presented in this review paper. Cu coatings were …
electrodeposited copper coatings is presented in this review paper. Cu coatings were …
Degradation of polymer films
D Cheneler, J Bowen - Soft Matter, 2013 - pubs.rsc.org
In this review paper the current state of research into the physical degradation of polymer
films is elucidated. Modern applications of polymer films and the implication of their …
films is elucidated. Modern applications of polymer films and the implication of their …
Finite element analysis of the critical ratio of coating thickness to indentation depth for coating property measurements by nanoindentation
Y Sun, T Bell, S Zheng - Thin solid films, 1995 - Elsevier
The nanoindentation process of a hard coating on a softer substrate has been simulated by
the finite element method (FEM). The frequently used three-face Berkovich indenter was …
the finite element method (FEM). The frequently used three-face Berkovich indenter was …
Nanoindentation identifications of mechanical properties of Cu6Sn5, Cu3Sn, and Ni3Sn4 intermetallic compounds derived by diffusion couples
PF Yang, YS Lai, SR Jian, J Chen, RS Chen - Materials Science and …, 2008 - Elsevier
We report in this paper Young's moduli and hardness of Cu6Sn5, Cu3Sn, and Ni3Sn4
intermetallic compounds (IMCs) measured by nanoindentation. The samples were prepared …
intermetallic compounds (IMCs) measured by nanoindentation. The samples were prepared …
Nanoindentation of amorphous aluminum oxide films I. The influence of the substrate on the plastic properties
NG Chechenin, J Bøttiger, JP Krog - Thin Solid Films, 1995 - Elsevier
Using nanoindentation techniques, the mechanical properties of amorphous Al2O3 thin films
with oxide thicknesses ranging from approximately 3 nm (native oxides) to 360 nm on …
with oxide thicknesses ranging from approximately 3 nm (native oxides) to 360 nm on …
Effect of substrate hardness and film structure on indentation depth criteria for film hardness testing
I Manika, J Maniks - Journal of Physics D: Applied Physics, 2008 - iopscience.iop.org
The indentation depth limits for the Vickers microhardness testing of amorphous,
polycrystalline, multilayer and single crystal coatings were investigated. The …
polycrystalline, multilayer and single crystal coatings were investigated. The …
Physico-mechanical characterisation of basecoats for tailored UV-cured multilayered wood coating systems
A Hermann, S Giljean, MJ Pac, C Marsiquet… - Progress in Organic …, 2023 - Elsevier
The durability and aesthetic properties of wood flooring arise from the properties of the
coating applied on its surface. Due to their fast-curing speed, high crosslinking density and …
coating applied on its surface. Due to their fast-curing speed, high crosslinking density and …
Stiffness distribution in insect cuticle: a continuous or a discontinuous profile?
Insect cuticle is a biological composite with a high degree of complexity in terms of both
architecture and material composition. Given the complex morphology of many insect body …
architecture and material composition. Given the complex morphology of many insect body …
Effect of penetration depth on indentation response of soft coatings on hard substrates: a finite element analysis
N Panich, Y Sun - Surface and Coatings Technology, 2004 - Elsevier
The nanoindentation process of a soft coating on a harder substrate has been simulated by
the finite element method. The frequently used three-face Berkovich indenter was simulated …
the finite element method. The frequently used three-face Berkovich indenter was simulated …
Accurate determination of Young's modulus and Poisson's ratio of thin films by a combination of acoustic microscopy and nanoindentation
Advances in nanoindentation technology have allowed easier and more accurate
measurement of surface hardness and Young's modulus of thin films and multilayers. The …
measurement of surface hardness and Young's modulus of thin films and multilayers. The …