Titanium and nickel alloys represent a significant metal portion of the aircraft structural and
engine components. When these critical structural components in aerospace industry are …

Titanium (Ti) alloys are produced with the combination of titanium and alloying elements.
Titanium and titanium alloys are lightweight materials with high toughness, corrosion …

To improve the microhardness and wear resistance of TC4 alloy, NbMoTaWTi high-entropy
alloy coating was fabricated on the surface of TC4 alloy by laser cladding. The coating …

This paper presents an overview of the recent advances in high performance cutting of
aerospace alloys and composite currently used in aeroengine and aerostructure …

In this work, the dry turning parameters of two different grades of nitrogen alloyed duplex
stainless steel are optimized by using Taguchi method. The turning operations were carried …

Various non-coated micro-grooves with 7–149 μm in depth and 0.14–0.50 in aspect ratio are
proposed on tool rake surfaces along cutting chip flowing. The objective is to understand …

This article correlates laboratory-based understanding in machining of titanium alloys with
the industry based outputs and finds possible solutions to improve machining efficiency of …

This chapter reviews the main difficulties impairing the machinability of titanium alloys. The
overview of machinability of titanium alloys is presented with respect to the following …

This paper is concerned with the experimental and numerical study of face milling of Ti–6Al–
4V titanium alloy. Machining is carried out by uncoated carbide cutters in the presence of an …

A micro-grinding approach is proposed to fabricate micro-groove array on tool rake surface.
These micro-grooves were used to rapidly dissipate cutting chips and heat from cutting zone …