Physical and mechanical properties of 3D-printed provisional crowns and fixed dental prosthesis resins compared to CAD/CAM milled and conventional provisional …

S Jain, ME Sayed, M Shetty, SM Alqahtani… - Polymers, 2022 - mdpi.com
Newly introduced provisional crowns and fixed dental prostheses (FDP) materials should
exhibit good physical and mechanical properties necessary to serve the purpose of their …

Factors affecting flexural strength of 3D‐printed resins: A systematic review

MM Gad, SM Fouda - Journal of Prosthodontics, 2023 - Wiley Online Library
Purpose The strength of 3D‐printed resins is affected by different factors, but review articles
clarifying these factors are limited. This review lists the factors affecting the strength of 3D …

3D-printed vs. heat-polymerizing and autopolymerizing denture base acrylic resins

L Perea-Lowery, M Gibreel, PK Vallittu, LV Lassila - Materials, 2021 - mdpi.com
The aim of this work was to investigate the effect of two post-curing methods on the
mechanical properties of a 3D-printed denture base material. Additionally, to compare the …

Comparison between conventional PMMA and 3D printed resins for denture bases: A narrative review

M Dimitrova, M Corsalini, R Kazakova… - Journal of Composites …, 2022 - mdpi.com
The aim of the current paper is to review the available literature reporting on comparative
studies of heat-cured resins and three-dimensionally printed biomaterials for denture bases …

[HTML][HTML] Assessing the physical and mechanical properties of 3D printed acrylic material for denture base application

A Altarazi, J Haider, A Alhotan, N Silikas, H Devlin - Dental Materials, 2022 - Elsevier
Abstract Objective Three-dimensional (3D) printing is increasingly being utilised in the
dental field because of its time-saving potential and cost effectiveness. It enables dental …

3D-Printed Nanocomposite Denture-Base Resins: Effect of ZrO2 Nanoparticles on the Mechanical and Surface Properties In Vitro

AA Alshaikh, A Khattar, IA Almindil, MH Alsaif, S Akhtar… - Nanomaterials, 2022 - mdpi.com
Due to the low mechanical performances of 3D-printed denture base resins, ZrO2
nanoparticles (ZrO2NPs) were incorporated into different 3D-printed resins and their effects …

Water sorption, solubility, and translucency of 3D-printed denture base resins

MM Gad, SZ Alshehri, SA Alhamid, A Albarrak… - Dentistry Journal, 2022 - mdpi.com
This study aimed to evaluate the water sorption, solubility, and translucency of 3D-printed
denture base resins (NextDent, FormLabs, and Asiga), compare them to heat-polymerized …

Comparative evaluation of surface roughness and hardness of 3D printed resins

YA Al-Dulaijan, L Alsulaimi, R Alotaibi, A Alboainain… - Materials, 2022 - mdpi.com
The effect of printing parameters on the surface characteristics of three-dimensional (3D)-
printed denture base resins (DBRs) is neglected. Therefore, this study investigated the effect …

Flexural properties and hardness of CAD‐CAM denture base materials

SM Fouda, MM Gad, R Abualsaud… - Journal of …, 2023 - Wiley Online Library
Purpose To compare flexural strength, elastic modulus, and surface hardness of computer
aided design and computer aided manufacturing CAD‐CAM milled, 3D‐printed, and heat …

Mechanical properties of the modified denture base materials and polymerization methods: A systematic review

AA Khan, MA Fareed, AH Alshehri… - International Journal of …, 2022 - mdpi.com
Amidst growing technological advancements, newer denture base materials and
polymerization methods have been introduced. During fabrication, certain mechanical …