Tuning of defect levels is the major concern for the application of ZnO nanoparticles. These
nanoparticles with different defect concentration were prepared by simple combustion …

Antimony sulfide films have been deposited by pulse electrodeposition on Fluorine doped
SnO 2 coated glass substrates from aqueous solutions containing SbCl 3 and Na 2 S 2 O 3 …

Sb 2 S 3 thin films grown by chemical bath deposition have received increasing interest for
its integration into solar cells. However, its crystallization by post-deposition annealing …

Nickel doped cadmium sulfide (Ni: CdS) thin films are deposited onto glass and FTO
substrate using spray pyrolysis technique. The effect of annealing temperature on the thin …

Nowadays, tremendous increase in environmental issue is an alarming threat to the
ecosystem. This paper reports, rapid synthesis and characterization for tin doped ZnO …

High-quality semi-conducting antimony sulfide (Sb 2 S 3) thin films were directly deposited
on the indium tin oxide (ITO) substrates by a green and facile one-step approach based on a …

In situ ellipsometry measurements in the spectra range from 246 to 1000 nm were performed
on a SiO 2/Si system at temperatures varying from 25 to 600 C. By using Cauchy dispersion …

Abstract Effects of Co concentration on the properties of ZnSe: Co films were investigated.
The amorphous and crystalline (ZnSe) 1-x: Co x (x== 0.1, 0.3, 0.5) thin films were grown on …

Abstract ZnO, ZnO: Ni 2+ and ZnO: Co 2+ nanoparticles (NPs) were prepared via
hydrothermal process. The synthesized samples were characterized by using various …

This paper reports the effect of aging time for In-Sn co-doped ZnO nanoparticles prepared by
simple combustion method. The synthesized nanoparticles were characterized and the …