Progress and opportunities in corrosion mitigation in heat transfer fluids for next-generation concentrating solar power

P Kondaiah, R Pitchumani - Renewable Energy, 2023 - Elsevier
Concentrating solar power (CSP) systems have gained considerable eminence in
converting solar thermal energy into electrical power in recent years. According to the US …

Analysis of the simultaneous adsorption mechanism of ammonium and phosphate on magnesium-modified biochar and the slow release effect of fertiliser

Q He, X Li, Y Ren - Biochar, 2022 - Springer
To decrease the eutrophication caused by nitrogen (N) and phosphorus (P) in water,
magnesium-modified corn stalk biochar (MgB) was prepared under the synergistic impact of …

Thermophysical properties of liquid chlorides from 600 to 1600 K: Melt point, enthalpy of fusion, and volumetric expansion

SS Parker, A Long, C Lhermitte, S Vogel… - Journal of Molecular …, 2022 - Elsevier
Melt point, enthalpy of fusion, and volumetric expansion of single-and multi-component
liquid chlorides {NaCl, KCl, LiCl, MgCl 2, CaCl 2, UCl 3} were measured experimentally …

Potential scalability of a cost-effective purification method for MgCl2-Containing salts for next-generation concentrating solar power technologies

Y Zhao, J Vidal - Solar Energy Materials and Solar Cells, 2020 - Elsevier
Next-generation concentrating solar power (CSP) technology requires a high-temperature
heat-transfer fluid and thermal energy storage media. Molten MgCl 2-KCl-NaCl is …

High-temperature corrosion of a nickel-based alloy in a molten chloride environment–The effect of thermal and chemical purifications

A Mortazavi, Y Zhao, M Esmaily, A Allanore… - Solar Energy Materials …, 2022 - Elsevier
There is currently an ever-increasing demand for higher process efficiencies in next
generation (Gen3) concentrating solar power (CSP). Higher process efficiencies may be …

Corrosion behavior of carburized 316 stainless steel in molten chloride salts

S Ren, Y Chen, XX Ye, L Jiang, S Yan, J Liang, X Yang… - Solar Energy, 2021 - Elsevier
The corrosion has been investigated for carburized 316 stainless steel (SS) and 316SS in
ternary molten NaCl-KCl-MgCl 2 salt at 700° C under argon atmosphere when adding Mg …

[HTML][HTML] Corrosion evaluation of eutectic chloride molten salt for new generation of CSP plants. Part 2: Materials screening performance

AG Fernández, LF Cabeza - Journal of Energy Storage, 2020 - Elsevier
The operating temperature of a steam turbine is limited to 565° C by the molten nitrate heat-
transfer fluid; therefore, molten-salt CSP technologies require alternative salt chemistries …

Technical and economic feasibility of molten chloride salt thermal energy storage systems

SH Gage, D Kesseli, J Dupree, C Kimbal… - Solar Energy Materials …, 2021 - Elsevier
A techno-economic study is performed to assess the feasibility of molten chloride salt
thermal energy storage (TES) systems for next generation concentrating solar power …

[HTML][HTML] Electrochemical behavior of deoxidation titanium scrap process by induced overpotential molten salt electrolyte

N Kwon, H Kim, UJ Ko, SJ Oh, MH Lee, JH Shin… - Electrochemistry …, 2024 - Elsevier
This study investigates the deoxidation process of low-grade titanium scrap through molten
salt electrolysis induced by overpotential. The research focuses on understanding the …

Distinct phase-selective corrosions of Ti-48Al alloy in aqueous electrolyte and molten salt

X Huang, PSSR Krishnan, KX Kuah, TL Meng, Y Ng… - Corrosion …, 2024 - Elsevier
Abstract Corrosion of Ti-48Al alloys, consisting of γ-TiAl phase and α 2-Ti 3 Al phase in
lamellar structures, has been studied by electrochemical method at room temperature and …