Wire and Arc Additive Manufacturing (WAAM) is a deposition rate process for the creation
and/or repair of large structural metallic components. The non-equilibrium heating and …

Abstract Purpose of Review Despite advanced technologies to avoid corrosion of dental
implants, the mechanisms toward the release of metals and their role in the onset of peri …

The metastable pitting corrosion behavior of laser powder bed fusion (LPBF) produced Ti-
6Al-4V is still unclear. Therefore, this work investigated the metastable pitting corrosion of …

Metastable β titanium alloys with both twinning (TWIP) and martensite transformation (TRIP)
usually exhibit a low yield strength of between 200 and 500 MPa, but high strain hardening …

Laser powder bed fusion (LPBF) technology realized the surgical personalized devices.
However, LPBF-produced titanium alloys face several limitations, such as obvious …

The microstructures, potentiodynamic curves, and electrochemical impedance spectroscopy
are characterized for Ti-6Al-4V samples produced by selective laser melting (SLM), SLM …

By characterizing electrochemical properties and oxide species on the surface layer with
XPS analysis, the corrosion behavior of (TiZrNbTa) 90 Mo 10 high entropy alloy (HEA) was …

A biocompatible Ti-12Mo alloy was fabricated by metal injection moulding (MIM) using non-
spherical titanium, molybdenum powders and a purposely designed binder. The density …

The present study explores the microstructural characteristics and electrochemical
responses of four metastable beta Ti-Nb-Mo alloys for biomedical implantation. They were …

At global level, there is a continuing concern for the research and development of alloys for
medical and biomedical applications. Metallic biomaterials are used in various applications …