A review of metastable beta titanium alloys
In this article, we provide a broad and extensive review of beta titanium alloys. Beta titanium
alloys are an important class of alloys that have found use in demanding applications such …
alloys are an important class of alloys that have found use in demanding applications such …
A review on deformation mechanisms of metastable β titanium alloys
Over the past few decades, titanium (Ti) alloys containing fully or mostly body-centred cubic
β phase in metastable state have received considerable interest due to their elevated …
β phase in metastable state have received considerable interest due to their elevated …
Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture
Although using elemental powder mixtures may provide broad alloy selection at low cost for
selective laser melting (SLM), there is still a concern on the resultant microstructural and …
selective laser melting (SLM), there is still a concern on the resultant microstructural and …
[HTML][HTML] Influence of Nb addition on the structure, microstructure, Vickers microhardness, and Young's modulus of new β Ti-xNb-5Mo alloys system
New Ti alloys are being developed to obtain materials with better properties for biomedical
applications. In order to avoid complications caused for the presence of Al and V ions in the …
applications. In order to avoid complications caused for the presence of Al and V ions in the …
In-situ microstructural investigations of the TRIP-to-TWIP evolution in Ti-Mo-Zr alloys as a function of Zr concentration
Aiming at overcoming the strength-ductility trade-off in structural Ti-alloys, a new family of
TRIP/TWIP Ti-alloys was developed in the past decade (TWIP: twinning-induced plasticity; …
TRIP/TWIP Ti-alloys was developed in the past decade (TWIP: twinning-induced plasticity; …
[HTML][HTML] Influence of the heat treatment temperature on the MAO coating produced in the Ti–25Ta–25Zr alloy
The main objective is to carry out several heat treatments to change the phases and some
characteristics of the MAO coatings formed in Ti–25Ta–25Zr alloy in order to understand …
characteristics of the MAO coatings formed in Ti–25Ta–25Zr alloy in order to understand …
ω phase strengthened 1.2 GPa metastable β titanium alloy with high ductility
This paper provides a novel approach for exploiting ω phase strengthening in a metastable
β titanium alloy while retaining high ductility. The addition of 1 wt% Fe into our previously …
β titanium alloy while retaining high ductility. The addition of 1 wt% Fe into our previously …
The effect of Al on the formation and stability of a BCC–B2 microstructure in a refractory metal high entropy superalloy system
The development of refractory metal high entropy superalloys has received great interest
due to their potential for high temperature structural applications. The formation of a two …
due to their potential for high temperature structural applications. The formation of a two …
Novel insight into the formation of α ″-martensite and ω-phase with cluster structure in metastable Ti-Mo alloys
M Li, X Min, K Yao, F Ye - Acta Materialia, 2019 - Elsevier
On the basis of the “-Mo-Ti-Mo-” linear unit along the specific< 111> β,< 110> β, and< 100>
β directions, the cluster structures of α ″-martensite and ω-phase were constructed in …
β directions, the cluster structures of α ″-martensite and ω-phase were constructed in …
Composition-dependent shuffle-shear coupling and shuffle-regulated strain glass transition in compositionally modulated Ti-Nb alloys
Athermal pure shuffle O′ nanodomains have been reported as a common structural state in
metastable β-Ti alloys. In this study, by integrating thermodynamic databases, first-principles …
metastable β-Ti alloys. In this study, by integrating thermodynamic databases, first-principles …