Highly filled elastomers present strong nonlinear mechanical behavior. This study proposes
a biaxial dynamic mechanical analysis (DMA) experiment to study the prestrain induced …

Digital light processing (DLP) printing forms solid constructs from fluidic resins by
photochemically crosslinking polymeric resins with reactive functional groups. DLP is used …

Hydroxyl terminated polybutadiene (HTPB) coating is widely used in a solid rocket motor,
but an aging phenomenon exists during long-term storage, which causes irreversible …

Highly-filled elastomers such as solid propellants exhibit a complex nonlinear viscoelastic
behavior. The microstructural origin of this behavior is difficult to ascertain with macroscopic …

In this study, a systematic experimental program was conducted to understand the stress−
strain behavior of a composite solid propellant after different accelerated aging times (30 …

The influence of prestrain on viscoelastic properties| E∗| and tan δ of four different HTPB
composite propellants was measured using Dynamic Mechanical Analysis (DMA). Nonlinear …

The aim of this study is to analyze effect of four different isocyanates and four different
plasticizers in hydroxyl‐terminated polybutadiene (HTPB) based elastomers by quantitative …

In this study, the removal of urea–formaldehyde (UF) resin adhesives from waste wood
particleboards (PBs) via hydrolysis was discussed, particularly the use of this application to …

Conventional plasticizers deteriorate mechanical and viscoelastic properties of the
propellants due to their migration upon aging and long-term storage, which affects reliability …

As a part of understanding of the network structure of urea–formaldehyde (UF) resin
adhesives, this study examined the swelling behaviour of cured UF resin adhesives with four …