Metallic materials are usually composed of single phase or multiple phases, which refers to
homogeneous regions with distinct types of the atom arrangement. The recent studies on …

The effect of large-strain cold-to-warm deformation on the microstructures and mechanical
properties of various steels and alloys is critically reviewed. The review is mainly focused on …

A novel high nitrogen hot-work die steel 3Cr5Mo2SiVN was manufactured by pressurized
induction melting, possessing excellent hardness-strength-toughness balance under …

This study aimed to investigate the erosion behavior and mechanism of a newly developed
25Cr3Mo2WNiV steel with a chrome coating using promoted ignition combustion tests. The …

An effect of tempforming on the microstructure, the carbide precipitation, and the
strengthening mechanisms of high-strength low-alloyed steel has been analyzed. The …

Hot-work die steel with excellent strength and toughness can improve the precision of the
die and prolong its service life. However, this is very difficult to achieve because of the …

In high-strength rebar, the various microstructures obtained by the Tempcore process and
the addition of V have a complex effect on the strength improvement of rebar. This study …

A new approach to the fracture toughness analysis is presented through in-situ
microcantilever bending in an electron microscope on a novel high vanadium high-speed …

Abstract 4Cr5Mo2V steels with different contents of vanadium (V)(0.15 V, 0.55 V, and 1.25 V
wt%) were prepared by smelting, homogenizing, forging, quenching and tempering. The …

We investigated the interplay of Nb addition and annealing temperature and its influence on
the microstructure evolution in low carbon cold-rolled steel to understand the unique change …