The increasing demand for orthopedic implants has driven the search for materials that
combine strength, biocompatibility, and long lifetime. Compared to stainless steel and Co-Cr …

Recently, the current technological progress in developing laser cladding technology has
brought new approaches in surface modification of titanium alloys. Herein, composite …

The main challenge faced by spacecraft is the large temperature difference in its operating
environment. Thermal control coatings prepared on spacecraft and instrument surfaces are …

Ortopedide biyomalzemeler, travma sonucu kırılan kemiklerin iyileşmesi için sabitleme ya da
osteoporoz gibi bir hastalık tarafından hasar gören eklem ya da kemiklerin yerini alması …

A chromium boride–chromium carbide–alumina composite coating was prepared in situ on
a Ti-6Al-4V titanium alloy substrate by plasma spraying of Cr2O3-Al-B4C composite powder …

A Ni layer was first electroplated on the surface of Ti-6Al-4V (TC4) to enhance surface
hardness and reduce the negative impact of a powder addition, and then, the preplated TC4 …

Commercially available austenic stainless steel substrate was coated with commercially
available, raw Al 2 O 3 powder applied by means of plasma spraying method and then re …

Efficiency and structural stability of gas-turbine engines were acheived with compliant
thermal barrier coatings (TBCs) on structural components. In TBCs, top ceramic coatings …

Titanium carbide based cermets are promising wear resistant coating materials used at
elevated temperatures in hostile environment owing to their excellent mechanical, physical …

Abstract Al 2 O 3-40 wt% TiO 2 (AT40) coating is a low-cost and widely applied ceramic
coating. In this article, the phase distribution, micro-hardness and wear mechanism, as well …