Mechanical and wear performance of Al/SiC surface composite prepared through friction stir processing

R Butola, L Tyagi, RM Singari, Q Murtaza… - Materials Research …, 2021 - iopscience.iop.org
In the present research work, AA7075 composite reinforced with silicon carbide particles has
been fabricated using Friction stir processing (FSP). The silicon carbide particles having a …

Solid Particle Erosion Performance of Multi-layered Carbide Coatings (WC-SiC-Cr_3C_2)

S Kumar, KC Anil - 2023 - catalog.lib.kyushu-u.ac.jp
A modern machine parts such as gas turbine blades and vanes are impacted by high
temperature and high speed solid dust particles. As a result may leads to disastrous failure …

Mechanical and wear analysis of Al6061-SiC/Al2O3/B4C hybrid metal matrix composites using stir casting process

SRM Paladugu, ND Aparna, PSR Sreekanth - Materials Today …, 2022 - Elsevier
In this present study hybrid aluminium metal matrix composites (HAMMC) were prepared by
employing stir casting technique at 725° C. Reinforcements such as Alumina (Al 2 O 3) …

A survey on effects of reinforcement on aluminium metal matrix composites

G Sivakaruna, DPS Babu - Int J Mech Eng Technol, 2017 - sdbindex.com
In the recent years the use of composites is increasing rapidly and likely to increase more
rapidly in the future. In the present industrial scenario Aluminium and its alloy based …

Effect of stirring speed and time on the mechanical properties of Al8011-SiC metal matrix composites

N Ashok, AJ Santhosh, AD Tura, HB Mamo… - Materials Today …, 2022 - Elsevier
In this experimental research work, specimens were fabricated with three different stirring
time periods and two different stirring speeds using the standard experimental setup to …

Al6061 Matrisli Hibrit Kompozitlerin Sertlik ve Çekme Dayanımına SiC Al2O3 ve Yumurta Kabuğu Tozu Takviyesinin Etkilerinin İncelenmesi

A Tok, S Ateş - Afyon Kocatepe Üniversitesi Fen Ve Mühendislik …, 2023 - dergipark.org.tr
Bu çalışmanın amacı kolayca bulunabilen atıklardan elde edilen takviye kullanarak çevre
dostu ve uygun maliyetli alüminyum matrisli kompozit geliştirmektir. Tavuk yumurtası …

Low-Stress Abrasion Response of Heat-Treated LM25–SiCp Composite

RK Singh, S Soni, P Mishra - … , Internet of Things (IoT) and Smart …, 2022 - taylorfrancis.com
The machinery and equipment performing in the abrasive environment, like sand, soil, ores
and dirt, suffer from severe abrasive wear. To prevent such machines and equipment from …

Optimization of Sliding Wear Behaviour of AA2219 Nanohybrid Composite Using Box-Behnken Design.

R Chitwadgi, B Siddesh, BL Shankar… - Journal of Mines …, 2023 - search.ebscohost.com
The wear performance of a nano hybrid aluminum metal matrix composite was investigated
in this study with a special emphasis on the impact of heat treatment on dry sliding …