PVD techniques proffering avenues for fabrication of porous tungsten oxide (WO3) thin films: A review
Over the last decade thin film technology has made its root strong in the field of science and
technology. Various applications demand refinement of different properties associated with …
technology. Various applications demand refinement of different properties associated with …
[HTML][HTML] Photochromism of molybdenum oxide
T He, J Yao - Journal of Photochemistry and Photobiology C …, 2003 - Elsevier
Molybdenum oxide can exhibit pronounced photochromism and thus might act as an
excellent photonic material for a number of technical applications. In the early stage of the …
excellent photonic material for a number of technical applications. In the early stage of the …
Two dimensional α-MoO3 nanoflakes obtained using solvent-assisted grinding and sonication method: application for H2 gas sensing
A liquid-based organic solvent-assisted grinding and sonication method was adopted for the
formation of two dimensional (2D) moderately hydrated α-MoO 3 nanoflake suspensions …
formation of two dimensional (2D) moderately hydrated α-MoO 3 nanoflake suspensions …
Electrodeposited α- and β-Phase MoO3 Films and Investigation of Their Gasochromic Properties
α-and β-Phase MoO3 are synthesized using an electrodeposition method on fluorine-doped
tin oxide (FTO) glass substrates from sodium-molybdate (Na2MoO4) solutions. We show that …
tin oxide (FTO) glass substrates from sodium-molybdate (Na2MoO4) solutions. We show that …
Gas sensing properties of MoO3 nanorods to CO and CH3OH
E Comini, L Yubao, Y Brando, G Sberveglieri - Chemical Physics Letters, 2005 - Elsevier
Molybdenum oxide nanorods were prepared via infrared irradiation heating a Mo foil directly
in air and deposited over alumina transducers equipped with Pt heater and IDC contacts in …
in air and deposited over alumina transducers equipped with Pt heater and IDC contacts in …
Lithium intercalated compounds: charge transfer and related properties
CM Julien - Materials Science and Engineering: R: Reports, 2003 - Elsevier
Numerous channel-or tunnel-structured compounds are interesting materials in which
lithium intercalation occurs primarily without destruction of the host lattice assuming a …
lithium intercalation occurs primarily without destruction of the host lattice assuming a …
Effect of substrate temperature on the structural and optical properties of MoO3 thin films prepared by spray pyrolysis technique
A Bouzidi, N Benramdane, H Tabet-Derraz… - Materials Science and …, 2003 - Elsevier
Thin films of Molybdenum oxide were prepared by spray pyrolysis technique on glass
substrates, by using 0.1 M of molybdenum chloride (MoCl5) dissolved in deionized water …
substrates, by using 0.1 M of molybdenum chloride (MoCl5) dissolved in deionized water …
Synthesis and characterization of MoO3/CoFe2O4 nanocomposite for photocatalytic applications
Abstract Fabrication of a MoO 3/CoFe 2 O 4 nanocomposite targeted for the enhanced
photodegradation in the visible region was carried out by using molybdenum oxide nano …
photodegradation in the visible region was carried out by using molybdenum oxide nano …
Versatile growth of freestanding orthorhombic α-molybdenum trioxide nano-and microstructures by rapid thermal processing for gas nanosensors
We demonstrate a new technique that requires a relatively low temperature of 670–800° C
to synthesize in 10–20 min high crystalline quality MoO3 nano-and microbelts and ribbons …
to synthesize in 10–20 min high crystalline quality MoO3 nano-and microbelts and ribbons …
The evolution of the Mo5+ oxidation state in the thermochromic effect of MoO3 thin films deposited by rf magnetron sputtering
Molybdenum trioxide (MoO 3) thin films were deposited on glass substrates by rf reactive
magnetron sputtering using a metallic molybdenum target. The thermochromic effect was …
magnetron sputtering using a metallic molybdenum target. The thermochromic effect was …