The tribological behavior of cutting is a decisive factor in changing the production cycle, cost,
and quality of parts. Minimum quantity lubrication (MQL) based on environmentally friendly …

Chemical reactivity and poor heat conductivity make nickel (Ni) and its alloys difficult to
process. The aerospace industry's expectations for high-quality surfaces are one of the …

In this brief survey, the use of nanoparticle dispersions in machining processes is discussed
and the relevant applicational performances are analysed and related to the structural and …

The current study delves into the combined influence of lubrication and cooling on the
machinability of a difficult-to-cut superalloy. A comparative study of four lubricating mediums …

Nanofluids are often used as heat transfer fluids due to their good thermal and flow
properties. Nanofluids are widely used in energy systems such as solar collectors, heat …

The conventional lubricants used for machining are mineral based petroleum oils which
effects on environment as well as human health and are difficult to dispose. Therefore, there …

One of the greatest environmental and health risks associated with electronic waste is toner
waste. Only 20–30% of global toner waste is recycled, and the rest is deposited in landfills …

Plasmonic nanofluids have found applications in many fields, for example, coolants, solar
collectors, and theranostics agents. For such applications, an important parameter is the …

Nimonic80A is one of the hard-to-cut superalloy materials. However, machining the same
remains difficult. The present study's objective is attained by taking surface quality and tool …

A special group of hybrid assisted processes termed media-assisted processes which apply
liquid media with special additives in the form of nanoparticles supplied to the cutting zone is …