Granulation of silicon nitride powders by spray drying: a review
SN Grigoriev, TN Soe, A Malakhinsky, I Makhadilov… - Materials, 2022 - mdpi.com
Spray drying is a widely used method of converting liquid material (aqueous or organic
solutions, emulsions and suspensions) into a dry powder. Good flowability, narrow size …
solutions, emulsions and suspensions) into a dry powder. Good flowability, narrow size …
Advanced high-temperature structural materials in petrochemical, metallurgical, power, and aerospace sectors—An overview
P Sengupta, I Manna - Future landscape of structural materials in India, 2022 - Springer
Metallic materials for structural applications are designed to withstand mechanical forces of
high and varying amplitude in static or dynamic loading conditions, prevent undue …
high and varying amplitude in static or dynamic loading conditions, prevent undue …
Microstructure and ablation behavior of Zr-Ti-Si-C multiphase coating fabricated by solid solution and in-situ reaction
A Shi, X Yang, C Fang, L Chen, J Yi, X Luo, Q Huang - Corrosion Science, 2021 - Elsevier
Abstract The Zr-Ti-Si-C solid solution coatings were fabricated by solid solution and in-situ
reaction methods, and effects of TiC on the microstructure and phase evolution, and ablation …
reaction methods, and effects of TiC on the microstructure and phase evolution, and ablation …
Effect of TiC additions on the microstructure, mechanical and tribological properties of NbC-CoCrFeNiMn high entropy alloys cermets
J Wu, W Zhu, W Yu, H Ma, Y Shao - … Journal of Refractory Metals and Hard …, 2023 - Elsevier
Abstract NbC-xTiC-15CoCrFeNiMn (x= 0, 5, 10, 15) cermets were prepared by powder
metallurgy, and the effects of the addition of second-phase carbide TiC on microstructure …
metallurgy, and the effects of the addition of second-phase carbide TiC on microstructure …
Oxidation of graphene-modified HfB2-SiC ceramics by supersonic dissociated air flow
EP Simonenko, NP Simonenko, AF Kolesnikov… - Journal of the European …, 2022 - Elsevier
The oxidation resistance of ultra-high-temperature ceramic material (HfB 2-30 vol% SiC)-2
vol% rGO (rGO: reduced graphene oxide) under long-term exposure (2000s) to a supersonic …
vol% rGO (rGO: reduced graphene oxide) under long-term exposure (2000s) to a supersonic …
Beneficial effect of low BN additive on densification and mechanical properties of hot-pressed ZrB2–SiC composites
SH Shafagh, S Jafargholinejad, S Javadian - Synthesis and Sintering, 2021 - synsint.com
The incorporation of 1 wt% hexagonal BN (hBN) into ZrB 2–30 vol% SiC could noticeably
better the fracture toughness, hardness, and consolidation behavior of this composite. This …
better the fracture toughness, hardness, and consolidation behavior of this composite. This …
Comparative evaluation of TiC and/or WC addition on microstructure, mechanical properties, thermal residual stress and reciprocating wear behaviour of ZrB2–20SiC …
The present study aims to evaluate and compare the effect of 5 vol.% TiC or WC addition on
densification, phase stability, microstructure, mechanical properties, thermal residual stress …
densification, phase stability, microstructure, mechanical properties, thermal residual stress …
Microstructure and mechanical properties of α/β-Si3N4 composite ceramics with novel ternary additives prepared via spark plasma sintering
J Huang, X Lv, X Dong, MI Hussain, C Ge - Ceramics International, 2022 - Elsevier
In this study, α/β-Si 3 N 4 composite ceramics with high hardness and toughness were
fabricated by adopting two different novel ternary additives, ZrN–AlN–Al 2 O 3/Y 2 O 3, and …
fabricated by adopting two different novel ternary additives, ZrN–AlN–Al 2 O 3/Y 2 O 3, and …
Modification of HfB2–30% SiC UHTC with Graphene (1 vol %) and Its Influence on the Behavior in a Supersonic Air Jet
EP Simonenko, NP Simonenko, AF Kolesnikov… - Russian Journal of …, 2021 - Springer
Oxidation under exposure to a supersonic dissociated air jet (with heat fluxes in the range
363–779 W/cm 2, total exposure time: 2000 s) was studied for HfB 2–30 vol% SiC ultra-high …
363–779 W/cm 2, total exposure time: 2000 s) was studied for HfB 2–30 vol% SiC ultra-high …
Effect of SiC and TiC addition on microstructural and mechanical characteristics of microwave sintered ZrB2 based hybrid composites
A Sharma, DB Karunakar - Ceramics International, 2021 - Elsevier
Abstract The effects of SiC (20, 25, 30 vol%) and TiC (5, 10, 15 vol%) addition on
microstructure, phase evolution, densification, and mechanical characteristics of microwave …
microstructure, phase evolution, densification, and mechanical characteristics of microwave …