Catalytic decomposition of methane (CDM) is a low-carbon hydrogen production process
where pure hydrogen and solid carbon are produced. In this study, we investigate catalyst …

Currently most of the hydrogen produced worldwide is obtained by reforming fossil fuels.
The advancement and use of carbon capture and sequestration technologies ensure the CO …

Herein, the promotion effect of only 0.3 wt% indium on 3% Ni/Al 2 O 3 and 3% Ni/CeO 2-Al 2
O 3 catalysts prepared by deposition-precipitation over a commercial alumina and on the …

Ni-based catalysts supported on γ-Al 2 O 3 modified by La 2 O 3 and CeO 2 promoters were
prepared in the present work. The objective was to study the promotional effect of addition of …

Abstract A Ni–Ce/MgAl 2 O 4 catalyst was prepared by the co-impregnation method by
adjusting the Ce/Ni ratio in a range of 0.0–1.0 for the combined steam and carbon dioxide …

The catalytic activity of Ni/CeO2–Al2O3 catalysts modified with noble metals (Pt, Ir, Pd and
Ru) was investigated for the steam reform of ethanol and glycerol. The catalysts were …

In the present work, a comparative study of Ni catalysts supported on commercially available
alumina and lanthana-alumina carriers was undertaken for the glycerol steam reforming …

Dry reforming of methane has been studied over Pt/ZrO2 catalysts promoted with Ce for
different temperatures and feed compositions. The influence of the impregnation strategy …

Three noble metal catalysts (Rh-, Pt-, Ru/Ce 0.75 Zr 0.25 O 2–δ) for reforming of
hydrocarbons were studied in steam and autothermal process conditions. Each catalyst was …

Ni-based catalysts are very effective and largely used for the steam reforming of heavy
hydrocarbons (tars) generated from biomass gasification, even if Ni suffers from deactivation …