Friction stir welding (FSW) was applied to 3mm-thick Ti–6Al–4V plates under different
rotational speeds. Defect-free welds were successfully produced at rotational speeds of 400 …

Abstract Butt joints of Ti-6Al-4V plates were produced by electron beam welding process
using both oscillating and non-oscillating beams. The joints were then inspected using X-ray …

The present study aims to determine the set of optimum process parameters in order to
minimize spiking during bead-on-plate welding of ETP copper plates using electron beam …

Abstract Effect of beam oscillation on the evolution of microstructure and its correlation to
mechanical properties for butt-welded Ti-6Al-4V plates has been studied using electron …

Electron beam welding (EBW) technique was used to perform dissimilar joining of plain
carbon steel to Fe–7% Al alloy under three different weld conditions such as with beam …

The properties of electron beam-welded AISI 316L stainless steel butt joints prepared with
and without beam oscillation were evaluated by microstructural analysis, mechanical testing …

The electron beam welding of the tubes and the half-cells for our 1.3 GHz single-cell
superconducting radiofrequency (SRF) cavities is complex due to the different thicknesses of …

The present study has investigated the influence of current pulsing on the structure and
mechanical properties of Ti–6Al–4V tungsten inert gas (TIG) weldments. Autogenous full …

The electron beam welding process was used to produce dissimilar butt-joints of AA-6061 to
AA-2024 sheets using various welding conditions such as different welding speed, double …

The changes of seam profiles and of heat affected zones during electron beam welding at
use of local beam deflection oscillations, directed across or along the joint, are studied. The …