An introduction to thermal sensors and thermistor materials is given in brief. After that novel
electrical components such as thick film thermistors and thermal sensors based on them are …

Abstract Mn 1.56 Co 0.96 Ni 0.48 O 4 (MCN) free-standing ultrathin chips are successfully
fabricated by using screen printing. The structure, electrical and IR absorption properties …

Nickel manganite thin films are good candidates for thermal imaging applications because
of their large temperature coefficient of resistance (TCR),(>− 3%/K) and good environmental …

Abstract Ni x Al y Mn 3− x− y O 4 (0< x< 0.6; 0< y< 0.3) series NTC chip thermistors with
homogeneous chemical compositions and high-pure spinel phases were fabricated via a …

Zinc-titanate ceramics were obtained by initial mechanical activation in a high-energy
planetary mill for 15 min followed by sintering at temperatures 900–1100° C for 2 h. Room …

Abstract∼ 2 μm thick Mn 1.56 Co 0.96 Ni 0.48 O 4 (MCN) films have been prepared on a Al
2 O 3 substrate by the chemical solution deposition method. X-ray diffraction and …

In this work the DC resistivity of sintered nickel manganite NiMn2O4 (NTC thermistor
material) was studied as a function of additional powder activation time in a planetary ball …

Purpose–The purpose of this paper is to apply negative thermal coefficient (NTC) thick film
segmented thermistors (TFSTs) in a micro‐flow sensor for water. Design/methodology …

Nickel manganite powder synthesized by calcination of a stoichiometric mixture of
manganese and nickel oxide was additionally mechanically activated in a high energy …

Intrinsic resistivity and carrier transport parameters of sintered nickel manganite samples
(NTC thermistor grade) were determined using a Hall effect measurement system based on …