All the specified thermochemical techniques of boriding in solid, liquid and gaseous media
were characterized and compared in this chapter based on the available literature data. The …

This study is dedicated to the detailed investigation of boronization kinetic, microstructural,
mechanical, and wear properties of high entropy alloys (HEAs) considering their sluggish …

Boronizing has been considered as a promising strategy to enhance the surface hardness
and corrosion resistance of the new emerged alloys, like CoCrNi medium-entropy alloy …

Chemical vapor deposited (CVD) diamond coatings can potentially improve the wear
resistance of cobalt–chromium medical implant surfaces, but the high cobalt content in these …

Kinetics of boride layer growth and tensile behaviour in borided commercial-purity nickel
was investigated. Boriding was carried out in a solid medium consisting of Ekabor-II …

Purpose This paper aims to investigate the effects of boriding on the structural, mechanical
and tribological properties of CoCrW dental alloy manufactured by the method of selective …

In this study, production of nickel boride (NixB) via calciothermic reduction in molten salt has
been studied. Firstly, the electrochemical behaviors of CaO and NiO in CaCl2 melt were …

Ekabor 2 powder of different weights, used by V type powder mixture was mixed with pure
iron powder. Specimens were created by dry pressing into die followed by cold isostatic …

This study investigated calciothermic cobalt boride (Co x B) powder production in molten
salt, starting from cheap oxide compounds, without pre-treatment by in situ Ca production via …

Abstract In this work, Cobalt-Magnesium (93% Co–7% Mg; CM) and Nickel-Magnesium
(93% Ni–7% Mg; NM) alloys were successfully borided by pack boriding at the temperature …