The properties and serviceability of 3D-printed metal parts depend on a variety of attributes.
These include the chemical composition, phases, morphology, spatial distributions of grain …

Nano-and micro-size TiC ceramic particles were synergistically utilized for the reinforcement
of Ti6Al4V alloy, manufactured through directed energy deposition. The corrosion current …

This manuscript examines development of noble corrosion-resistant Ti6Al4VxCryNi alloys
by μ-plasma arc powder additive manufacturing (μ-PAPAM) process for chemical …

A deep eutectic solvent Ethaline, composing of choline chloride (vitamin B 4) and ethylene
glycol, is presented as electrochemical surface modification agent for Ti6Al4V alloy. The …

Large titanium component fabricated using Wire Arc Additive Manufacturing (WAAM)
remains a challenge as it is difficult to obtain uniform material properties, such as corrosion …

The microstructural effects of a Cr-modified Ti–6Al–4V (Ti64) alloy on the mechanical,
electrochemical and stress corrosion cracking properties were studied. With the aid of …

This paper adopts electrochemical machining (ECM) to machine spiral-shaped deep holes,
which are difficult to machine by conventional machining methods. Firstly, a cathode …

In tests of typical iron-based materials, it has been found that the dissolution efficiency at low
temperature is greater than that at ambient temperature. By utilizing sputtering X-ray …

The main challenge in electrochemical machining (ECM) of titanium alloys is not processing
efficiency, but the difficulty in achieving high-quality machined surfaces. Titanium alloys are …

Abstract Although Ti 2 AlNb alloy has numerous exceptional properties that make it one of
the most promising materials in the aerospace field, it also presents significant challenges to …