Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: A review
R Franz, C Mitterer - Surface and Coatings Technology, 2013 - Elsevier
The current review aims to provide an overview on the research performed with vanadium
containing nitride hard coatings. Such coatings were synthesised with the objective of …
containing nitride hard coatings. Such coatings were synthesised with the objective of …
On the thermodynamics of friction and wear―a review
M Amiri, MM Khonsari - Entropy, 2010 - mdpi.com
Entropy | Free Full-Text | On the Thermodynamics of Friction and Wear―A Review Next Article
in Journal Functional Information: Towards Synthesis of Biosemiotics and Cybernetics Next …
in Journal Functional Information: Towards Synthesis of Biosemiotics and Cybernetics Next …
Microstructure and wear properties of TiCN/Ti coatings on titanium alloy by laser cladding
Y Yang, D Zhang, W Yan, Y Zheng - Optics and Lasers in Engineering, 2010 - Elsevier
Titanium carbide nitride (TiCN) reinforced Ti coating was fabricated on the surface of Ti–6Al–
4V alloy by laser cladding method. Microstructure and wear properties at the surface of the …
4V alloy by laser cladding method. Microstructure and wear properties at the surface of the …
Structure–property relations in ZrCN coatings for tribological applications
ZrCN coatings were deposited by dc reactive magnetron sputtering with N2 flows ranging
from 2 to 10sccm in order to investigate the influence of the nitrogen incorporation on …
from 2 to 10sccm in order to investigate the influence of the nitrogen incorporation on …
Extreme friction reductions during initial running-in of W–S–C–Ti low-friction coatings
H Nyberg, J Sundberg, E Särhammar, F Gustavsson… - Wear, 2013 - Elsevier
The disulphides of tungsten and molybdenum are known for their low friction properties
when used as solid lubricants. Due to their low hardness, their load bearing capacity when …
when used as solid lubricants. Due to their low hardness, their load bearing capacity when …
Fabrication of graphite reinforced TiCxNy by spark plasma sintering technique: A comparative assessment of microstructural integrity and nanoindentation properties
This study investigated the fabrication of three different binderless TiC x N y (where the
values of x and y are 0.5, 0.7, 0.9 and 0.5, 0.3, 0.1 respectively) reinforced with 0.5 wt%, 1.0 …
values of x and y are 0.5, 0.7, 0.9 and 0.5, 0.3, 0.1 respectively) reinforced with 0.5 wt%, 1.0 …
Phase constituents and mechanical properties of laser in-situ synthesized TiCN/TiN composite coating on Ti-6Al-4V
Y Yang, W Yao, H Zhang - Surface and Coatings Technology, 2010 - Elsevier
Laser in-situ synthesis technology at room temperature was applied to obtain TiCN/TiN
composite coating. A pulsed Nd: YAG laser (wavelength 1064nm) was used to melt the …
composite coating. A pulsed Nd: YAG laser (wavelength 1064nm) was used to melt the …
Structural, mechanical and electrochemical comparison of TiN and TiCN coatings on XC48 steel substrates in NaCl 3.5% water solution
Titanium carbonitride (TiCN) and titanium nitride (TiN) were deposited on steel substrates
XC48 using magnetron sputtering technique. The hardness of both films increases with the …
XC48 using magnetron sputtering technique. The hardness of both films increases with the …
Effects of functionally graded TiN layer and deposition temperature on the structure and surface properties of TiCN coating deposited on plasma nitrided H13 steel by …
The poor adhesion of nitride coatings to steel substrates is one of the main challenges for
industrial applications. In this study, plasma nitriding process and TiN functional …
industrial applications. In this study, plasma nitriding process and TiN functional …
Friction and wear properties of TiCN coatings sliding against SiC and steel balls in air and water
Q Wang, F Zhou, K Chen, M Wang, T Qian - Thin Solid Films, 2011 - Elsevier
The TiCN coatings were deposited on WC cemented carbides using enhanced cathodic arc
magnetron sputtering. The topography of TiCN coatings were observed using scanning …
magnetron sputtering. The topography of TiCN coatings were observed using scanning …