[HTML][HTML] Direct laser additive manufacturing of high performance oxide ceramics: A state-of-the-art review

S Pfeiffer, K Florio, D Puccio, M Grasso… - Journal of the European …, 2021 - Elsevier
The implementation of additive manufacturing for ceramics is more challenging than for
other material classes, since most of the shaping methods require polymer binder. Laser …

Reactive flash sintering of ceramics: a review

B Yoon, V Avila, IR Lavagnini… - Advanced …, 2023 - Wiley Online Library
As a novel electric field‐assisted sintering technique, flash sintering (FS) has gained
significant interest over the past decade due to its compelling time and cost efficiency. This …

Nanostructured Al2O3-YAG-ZrO2 ternary eutectic components prepared by laser engineered net shaping

Z Fan, Y Zhao, Q Tan, N Mo, MX Zhang, M Lu, H Huang - Acta Materialia, 2019 - Elsevier
The present work proposed a novel 3D printing approach for fabricating ternary eutectic
ceramics (Al 2 O 3-YAG-ZrO 2, or AYZ in short) using laser engineered net shaping (LENS) …

One-step additive manufacturing and microstructure evolution of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics by laser directed energy deposition

H Liu, H Su, Z Shen, D Zhao, Y Liu, Y Guo… - Journal of the European …, 2021 - Elsevier
Synchronized-powder-feeding-based laser directed energy deposition (LDED) has great
application potential for the rapid fabrication of large-scale composite ceramics with complex …

[HTML][HTML] Insight into tuning of ZrO2 distribution and mechanical properties of directionally solidified Al2O3/(5Re0. 2) AG/ZrO2 eutectic ceramic composites

Y Zhong, Z Li, X Wang - Composites Part B: Engineering, 2023 - Elsevier
Abstract A novel Al 2 O 3/(Y 0.2 Er 0.2 Yb 0.2 Ho 0.2 Lu 0.2) 3 Al 5 O 12 ((5Re 0.2) AG)/ZrO 2
eutectic high entropy oxide ceramic composite (HEOC) was prepared by the directional …

Seed-crystal-induced directional solidification toward Al2O3/(Y0. 2Er0. 2Yb0. 2Ho0. 2Lu0. 2) 3Al5O12/ZrO2 ternary eutectic ceramics

Y Zhong, Z Li, X Wang - Acta Materialia, 2024 - Elsevier
The present work successfully prepared a novel Al 2 O 3/(Y 0.2 Er 0.2 Yb 0.2 Ho 0.2 Lu 0.2)
3 Al 5 O 12/ZrO 2 (or Al 2 O 3/(5RE 0.2) AG/ZrO 2 in short) ternary eutectic ceramic with the …

Introduction of low strain energy GdAlO3 grain boundaries into directionally solidified Al2O3/GdAlO3 eutectics

X Wang, W Zhang, Y Zhong, L Sun, Q Hu, J Wang - Acta Materialia, 2021 - Elsevier
In order to tune the mechanical properties of the Al 2 O 3/GdAlO 3 (GAP) eutectic ceramics,
low energy GAP grain boundaries (GBs) were introduced into Al 2 O 3/GAP eutectic …

[HTML][HTML] Stability of crystallographic texture and mechanical anisotropy toward Al2O3/YAG eutectic ceramic composite using single crystalline seeds

Y Liu, H Su, X Tan, Z Shen, X Li, H Jiang… - Composites Part B …, 2024 - Elsevier
During the directional solidification of Al 2 O 3-based eutectic ceramic composites,
crystallographic orientation control is a promising method for tailoring the performances of …

[HTML][HTML] In-situ synthesis and characterization of calcium phosphate coatings on rapidly solidified zirconia toughened alumina eutectic bioceramics by laser cladding

H Su, G Fan, D Dong, Y Liu, Z Shen, D Zhao, Y Guo… - Materials & Design, 2023 - Elsevier
Rapidly solidified zirconia toughened alumina (ZTA) eutectic bioceramics are promising
load-bearing materials that meet the needs for durability and aging resistance for biomedical …

Insights into high thermal stability of laser additively manufactured Al2O3/GdAlO3/ZrO2 eutectic ceramics under high temperatures

H Liu, H Su, Z Shen, D Zhao, Y Liu, Y Guo, J Zhang… - Additive …, 2021 - Elsevier
Laser additive manufacturing techniques have been considered to be the most promising
methods to fabricate melt-grown Al 2 O 3-based eutectic ceramics which are potential …