Study on three-dimensional stress field of gob-side entry retaining by roof cutting without pillar under near-group coal seam mining

X Sun, Y Liu, J Wang, J Li, S Sun, X Cui - Processes, 2019 - mdpi.com
In order to explore the distribution law of stress field under the mining mode of gob-side
entry retaining by roof cutting without pillar (GERRCP) under goaf, based on the engineering …

[PDF][PDF] Design and performance analysis of improved valve construction being used in oil and gas industry

KS Mammadov, JN Aslanov - International Journal on Technical …, 2022 - iotpe.tabaelm.com
To explore the effect of the weariness to the valve constructions under various angles of
opening & closing conditions, this paper considered the main seal of the valve construction …

[HTML][HTML] Ensuring the excavation workings stability when developing excavation sites of flat-lying coal seams by three workings

OI Kazanin, AA Ilinets - Записки Горного института, 2022 - cyberleninka.ru
On the basis of analysis of mining plans and field studies at mines of JSC SUEK-Kuzbass, it
is shown that in conditions of increasing the size of excavation columns during the …

Investigating the impact of caving on longwall mine ventilation using scaled physical modeling

V Gangrade, SJ Schatzel, SP Harteis… - Mining, metallurgy & …, 2019 - Springer
In longwall mining, ventilation is considered one of the more effective means for controlling
gases and dust. In order to study longwall ventilation in a controlled environment …

[HTML][HTML] Numerical simulation on stress evolution and deformation of overlying coal seam in lower protective layer mining

H Zhang, Z Wen, B Yao, X Chen - Alexandria Engineering Journal, 2020 - Elsevier
Protective layer mining (PLM) is one of the most effective regional measures against gas
outburst, and the most preferred technique to prevent and control gas outburst. This paper …

Stress-dependent permeability of fractures in tight reservoirs

N Cao, G Lei, P Dong, H Li, Z Wu, Y Li - Energies, 2018 - mdpi.com
Permeability is one of the key factors involved in the optimization of oil and gas production in
fractured porous media. Understanding the loss in permeability influenced by the fracture …

Physical simulation of upper protective coal layer mining with different coal seam inclinations

F Fang, C Shu, H Wang - Energy Science & Engineering, 2020 - Wiley Online Library
Protective coal layer (PCL) mining is a preferred regional method for preventing coal and
gas outbursts; stress‐relief of PCL mining is the prerequisite of pressure‐relief gas drainage …

Study on temporal and spatial evolution characteristics of overburden deformation and gas emission during the longwall working face initial mining phase

C Li, S Wu, C Zheng, X Sun… - Journal of Geophysics and …, 2022 - academic.oup.com
It is very important from the point of view of gas control and production safety to efficiently
extract gas from stress-relief fractures in the initial phase of the longwall working face. In the …

Fracture criterion of basic roof deformation in fully mechanized mining with large dip angle

K Yang, Z Wei, X Chi, A Gao… - Energy Exploration & …, 2021 - journals.sagepub.com
To explore the structure evolution of overlying strata and pressure characteristics of coal
mining with large dip angle, the basic roof mechanical model was established that based on …

Effectiveness Spatiotemporal of Pressure Unloading and Gas Extraction in Remote Upper Protected Seam Mining

Z Bai, H Kou, Q Ma, J Deng, X Li, X Yi - ACS omega, 2024 - ACS Publications
Severe gas hazards are increasing in deep mining areas, and there exists an enormous
traditional challenge for protected seam mining. In this work, we conducted a multifaceted …