A review of the mechanical and tribological behavior of cold spray metal matrix composites
Cold spray is an effective solid-state process for the fabrication of metal matrix composites
where metallic, ceramic, or intermetallic reinforcements are embedded in a metallic matrix …
where metallic, ceramic, or intermetallic reinforcements are embedded in a metallic matrix …
Supersonic particle deposition as an additive technology: methods, challenges, and applications
Z Monette, AK Kasar, M Daroonparvar… - The International Journal …, 2020 - Springer
This paper presents a review of recent research inventions in the field of supersonic particle
deposition (SPD) additive manufacturing (AM) technology. The SPD, also known as cold …
deposition (SPD) additive manufacturing (AM) technology. The SPD, also known as cold …
Cold spray aluminum–alumina cermet coatings: effect of alumina content
R Fernandez, B Jodoin - Journal of thermal spray technology, 2018 - Springer
Deposition behavior and deposition efficiency were investigated for several aluminum–
alumina mixture compositions sprayed by cold spray. An increase in deposition efficiency …
alumina mixture compositions sprayed by cold spray. An increase in deposition efficiency …
Friction and wear behavior of suspension plasma sprayed tantalum oxide coatings at elevated temperatures
Tantalum oxide-based coatings have recently become potential candidates for high-
temperature tribological applications due to their high thermal stability and ionic potential …
temperature tribological applications due to their high thermal stability and ionic potential …
Sliding wear behavior of cold-sprayed Ni-WC composite coatings: Influence OF WC content
SA Alidokht, RR Chromik - Wear, 2021 - Elsevier
Abstract Metal Matrix Composites reinforced with WC particles and Co or Ni as matrices are
well-known for their unique combination of hardness, toughness, and thus superior wear …
well-known for their unique combination of hardness, toughness, and thus superior wear …
High temperature friction and wear behavior of cold-sprayed Ti6Al4V and Ti6Al4V-TiC composite coatings
The poor wear resistance of titanium and its alloys often results in galling and high wear
rates. One method to improve their wear resistance is by hard secondary phase …
rates. One method to improve their wear resistance is by hard secondary phase …
Room and elevated temperature sliding wear behavior of cold sprayed Ni-WC composite coatings
TB Torgerson, MD Harris, SA Alidokht… - Surface and Coatings …, 2018 - Elsevier
The tribological properties of cold sprayed Ni-WC metal matrix composite (MMC) coatings
were investigated under dry sliding conditions from room temperature (RT) up to 400° C …
were investigated under dry sliding conditions from room temperature (RT) up to 400° C …
Cold spraying of WC-Co-Ni coatings using porous WC-17Co powders: Formation mechanism, microstructure characterization and tribological performance
WC-Co metal matrix composite is frequently applied in the form of coating to prevent the
underlying base materials from serious wear. Cold spray has been successfully used to …
underlying base materials from serious wear. Cold spray has been successfully used to …
Microstructure and tribological properties of cold sprayed WCp/Ti composite coatings on Ti6Al4V titanium alloy
Y Xu, J Ge, W Li - Tribology International, 2024 - Elsevier
In this study, WC p/Ti composite coatings with the WC proportions of 30.1–44.1 vol% were
cold sprayed using powders with WC proportions of 40–80 vol%. Coatings are well bonded …
cold sprayed using powders with WC proportions of 40–80 vol%. Coatings are well bonded …
Effect of WC morphology on dry sliding wear behavior of cold-sprayed Ni-WC composite coatings
SA Alidokht, S Yue, RR Chromik - Surface and Coatings Technology, 2019 - Elsevier
Cold spray is a relatively new method used to deposit WC reinforced composite coatings,
where its low temperature is advantageous for avoiding oxidation and carbide …
where its low temperature is advantageous for avoiding oxidation and carbide …