Investigations on tribological and microstructure characteristics of WC-12Co/FeNiCrMo composite coating by HVOF process
In the current study, a high-velocity oxyfuel (HVOF) system is used to generate an enhanced
temperature sliding wear-resistant iron-based (FeNiCrMo) composite coating on a boiler …
temperature sliding wear-resistant iron-based (FeNiCrMo) composite coating on a boiler …
Characterisation and wear behaviour of SiC reinforced FeNiCrMo composite coating by HVOF process
Analysis of the sliding wear and microstructural characteristics of iron based composite
coatings are discussed. The feedstock, which consisted of 30% SiC and 70% FeNiCrMo …
coatings are discussed. The feedstock, which consisted of 30% SiC and 70% FeNiCrMo …
Rolling contact fatigue behavior of thermal-sprayed coating: A review
P Zhong-Yu, X Bin-Shi, W Hai-Dou… - Critical Reviews in …, 2020 - Taylor & Francis
Rolling contact fatigue (RCF) of sprayed coating is complicated process relating to materials,
structures, loading conditions, etc. Herein, the research works over the past decades in RCF …
structures, loading conditions, etc. Herein, the research works over the past decades in RCF …
Review on tribological and mechanical behavior in HVOF thermal-sprayed composite coatings
The engineering components used in various applications, such as aircraft, power
generation, marine, chemical, and paper industries, perform under extreme environmental …
generation, marine, chemical, and paper industries, perform under extreme environmental …
Microstructural and tribological resistance of flame-sprayed CoMoCrSi/WC-CrC-Ni and CoMoCrSi/WC-12Co composite coatings remelted by microwave energy
The hard facing composite coatings such as CoMoCrSi/30% WC-CrC-Ni and
CoMoCrSi/30% WC-12Co are coated on grade-2 titanium substrate through Flame spray …
CoMoCrSi/30% WC-12Co are coated on grade-2 titanium substrate through Flame spray …
Influence of microwave hybrid heating on the sliding wear behaviour of HVOF sprayed CoMoCrSi coating
CoMoCrSi superalloy powder (Tribaloy-T400) consists of intermetallic laves phase and
primary eutectic phase of Co-rich solid solution. Processing of Tribaloy-T400 powder is …
primary eutectic phase of Co-rich solid solution. Processing of Tribaloy-T400 powder is …
[HTML][HTML] Study of the corrosion and cavitation resistance of HVOF and HVAF FeCrMnSiNi and FeCrMnSiB coatings
LL Silveira, AGM Pukasiewicz, DJM de Aguiar… - Surface and Coatings …, 2019 - Elsevier
Cavitation and corrosion on hydrodynamic components and systems reduces the
operational efficiency. The use of wear resistant coatings has been studied as a solution to …
operational efficiency. The use of wear resistant coatings has been studied as a solution to …
Review on testing facilities assisting in development of numerical models for erosion calculation in centrifugal slurry pumps
Wear continuously occurs in components of centrifugal pumps installed in thermal power
plants. Various components of ash disposal systems such as a slurry pump is deteriorated …
plants. Various components of ash disposal systems such as a slurry pump is deteriorated …
Role of thermal spray coatings on erosion, corrosion, and oxidation in various applications: a review
Depending on the location, extreme environmental conditions must have different graded
properties. This is especially important for surfaces that are exposed to mechanical …
properties. This is especially important for surfaces that are exposed to mechanical …
[HTML][HTML] Ultrasonic cavitation erosion mechanism and mathematical model of HVOF sprayed Fe-based amorphous/nanocrystalline coatings
L Qiao, Y Wu, S Hong, J Cheng - Ultrasonics Sonochemistry, 2019 - Elsevier
A Fe-based amorphous/nanocrystalline coating was prepared on the AISI 321 steel by the
high-velocity oxygen-fuel (HVOF) thermal spraying technology in this paper. Cavitation …
high-velocity oxygen-fuel (HVOF) thermal spraying technology in this paper. Cavitation …