Investigation of the effect of sol–gel synthesis variables on structural and photocatalytic properties of TiO2 nanoparticles
MA Behnajady, H Eskandarloo, N Modirshahla… - Desalination, 2011 - Elsevier
In the present study, titanium dioxide nanoparticles were synthesized by sol–gel method,
from various precursors in some solvents under different synthesis conditions such as …
from various precursors in some solvents under different synthesis conditions such as …
Nanostructured TiO2–CeO2 mixed oxides by an aqueous sol–gel process: Effect of Ce: Ti molar ratio on physical and sensing properties
MR Mohammadi, DJ Fray - Sensors and Actuators B: Chemical, 2010 - Elsevier
Nanostructured TiO2–CeO2 thin films and powders were prepared by a straightforward
aqueous particulate sol–gel route. Titanium (IV) isopropoxide and cerium chloride were …
aqueous particulate sol–gel route. Titanium (IV) isopropoxide and cerium chloride were …
Sol–gel nanostructured titanium dioxide: controlling the crystal structure, crystallite size, phase transformation, packing and ordering
MR Mohammadi, DJ Fray, A Mohammadi - Microporous and Mesoporous …, 2008 - Elsevier
The anatase phase of titania was stabilised with physically modifying particulate sol–gel
process. Two major parameters, peptisation temperature and drying temperature, were …
process. Two major parameters, peptisation temperature and drying temperature, were …
Synthesis and electrophoretic deposition of TiO2-SiO2 composite nanoparticles on stainless steel substrate
Titanium dioxide-silica composite nanoparticles were synthesized through a verified Stöber
sol-gel method. The resultant nanoparticles, which consisted of titanium dioxide cores …
sol-gel method. The resultant nanoparticles, which consisted of titanium dioxide cores …
Corrosion protection of mild steel by applying TiO2 nanoparticle coating via sol-gel method
TiO 2 nanoparticle coatings possess good thermal and electrical properties and they are
resistant to oxidation, corrosion, erosion and wear in high temperature environments. This …
resistant to oxidation, corrosion, erosion and wear in high temperature environments. This …
Doping CuSCN films for enhancement of conductivity: Application in dye-sensitized solid-state solar cells
Construction of dye-sensitized solid-state solar cells requires high band-gap (therefore,
transparent) hole collectors which can be deposited on a dye-coated nanocrystalline …
transparent) hole collectors which can be deposited on a dye-coated nanocrystalline …
Synthesis of high surface area nanocrystalline anatase-TiO2 powders derived from particulate sol-gel route by tailoring processing parameters
MR Mohammadi, MC Cordero-Cabrera… - Journal of sol-gel …, 2006 - Springer
Stabilised titania sols were prepared using an additive free particulate sol-gel route, via
electrostatic stabilisation mechanism, with various processing parameters. Peptisation …
electrostatic stabilisation mechanism, with various processing parameters. Peptisation …
Sensor performance of nanostructured TiO2 thin films derived from particulate sol–gel route and polymeric fugitive agents
MR Mohammadi, DJ Fray… - Sensors and Actuators B …, 2007 - Elsevier
High specific surface area (SSA) nanocrystalline powders and dip-coated TiO2 thin films
have been prepared by a particulate sol–gel route with added polymeric fugitive agents …
have been prepared by a particulate sol–gel route with added polymeric fugitive agents …
Stereoselective and enantioselective electrochemical sensing of monosaccharides using imprinted boronic acid‐functionalized polyphenol films
E Granot, R Tel‐Vered… - Advanced Functional …, 2008 - Wiley Online Library
Imprinted polymer films for the selective analysis of D‐glucose and D‐mannose are
prepared by the co‐electropolymerization of phenol with a 3‐hydroxyphenyl boronic acid …
prepared by the co‐electropolymerization of phenol with a 3‐hydroxyphenyl boronic acid …
Synthesis and characterisation of nanosized TiO2–ZrO2 binary system prepared by an aqueous sol–gel process: Physical and sensing properties
MR Mohammadi, DJ Fray - Sensors and Actuators B: Chemical, 2011 - Elsevier
Nanostructured TiO2–ZrO2 thin films and powders were prepared by a straightforward
aqueous particulate sol–gel route. Titanium (IV) isopropoxide and zirconium (IV) acetate …
aqueous particulate sol–gel route. Titanium (IV) isopropoxide and zirconium (IV) acetate …