Influence of CuS membrane annealing time on the sensitivity of EGFET pH sensor

FA Sabah, NM Ahmed, Z Hassan… - Materials Science in …, 2017 - Elsevier
In this study, CuS membranes were deposited on glass substrates using spray pyrolysis,
and then annealed at 150° C for durations of 5, 15 and 30 min. The precursor materials for …

Influence of CuS powder concentration on the construction of hybrid PVA/CuS thin films for polymer light-emitting applications

FA Sabah, I Abdul Razak, EA Kabaa, MF Zaini… - Journal of Materials …, 2020 - Springer
In this study, copper sulfide (CuS) semiconductor material is combined with a polyvinyl
alcohol (PVA) polymer to synthesize a hybrid organic/inorganic thin film, due to their …

Influences of substrate type on the pH sensitivity of CuS thin films EGFET prepared by spray pyrolysis deposition

FA Sabah, NM Ahmed, Z Hassan… - Materials Science in …, 2017 - Elsevier
Copper sulphide (CuS) thin films were deposited by spray pyrolysis using CuCl 2· 2H 2 O
and Na 2 S 2 O 3· 5H 2 O precursors as sources of Cu 2+ and S 2-respectively, with …

Effect of annealing on the electrical properties of CuxS thin films

FA Sabah, NM Ahmed, Z Hassan, HS Rasheed - Procedia Chemistry, 2016 - Elsevier
Copper sulphide CuS was deposited on three substrates; glass, Indium Tin Oxide (ITO) and
Ti by using spray pyrolysis deposition (SPD). After depositing CuS thin films on the …

Investigation the CuS thin film prepared by pulsed laser deposition

IS Najm, SM Kadhim, AA Alwahib - Materials Today: Proceedings, 2021 - Elsevier
This paper introduces a full study of CuS thin-film deposited on the quartz substrate. Copper
sulfide thin films were prepared using the pulsed laser deposition technique and tested …

A novel CuS thin film deposition method by laser-assisted spray photolysis deposition and its application to EGFET

FA Sabah, NM Ahmed, Z Hassan… - Sensors and Actuators B …, 2017 - Elsevier
Several studies have deposited copper sulphide (CuS) thin films via spray pyrolysis using a
heater. In this study, the spray pyrolysis deposition of CuS thin films was carried out using …

Chemically sprayed p-type CuS thin film-characterization and feasibility study on junction with n-Si for the development of solar cell

VV Mohan, KP Vijayakumar - 2020 5th IEEE International …, 2020 - ieeexplore.ieee.org
Metal sulphides have been subjected to extensive research due to their excellent
optoelectronic properties. Among them, CuS is a p-type material with a wide band gap in the …

[PDF][PDF] Perspectives for development and industrial application of spray pyrolysis method

S Kozhukharov, S Tchaoushev - Annu Proceeds “angel Kanchev” …, 2011 - conf.uni-ruse.bg
The production of industrial products is based on the specific combination among applied
methods, as well as the conditions of synthesis,(temperature, pressure, rates of gaseous and …

Effects of Concentration and Substrate Type on Structure and Conductivity of p-Type CuS Thin Films Grown by Spray Pyrolysis Deposition

FA Sabah, NM Ahmed, Z Hassan - Journal of Electronic Materials, 2017 - Springer
Copper sulphide (CuS) thin films were grown upon Ti, indium tin oxide (ITO), and glass
substrates by using spray pyrolysis deposition at 200° C. The films exhibited good adhesion …

CuS p-type thin film characterization deposited on Ti, ITO and glass substrates using spray pyrolysis deposition (SPD) for light emitting diode (LED) application

FA Sabah, NM Ahmed, Z Hassan… - AIP Conference …, 2016 - pubs.aip.org
The copper sulphide (CuS) thin films were grown with good adhesion by spray pyrolysis
deposition (SPD) on Ti, ITO and glass substrates at 200 C. The distance between nozzle …