[HTML][HTML] Recent developments in ship collision analysis and challenges to an accidental limit state design method

B Liu, CG Soares - Ocean Engineering, 2023 - Elsevier
The paper presents a review of the developments in ship collision analysis over the last 10
years and the challenges to an Accidental Limit State (ALS) design method of ships based …

Developing empirical formulations to predict residual strength and damages in tension-leg platform hulls after a collision

QT Do, T Ghanbari-Ghazijahani, AR Prabowo - Ocean Engineering, 2023 - Elsevier
During service life, a TLP is under potential damage caused by attendant vessel collisions.
The influence of local dents on the maximum strength of TLP is a challenge in ocean …

Experimental and numerical investigation into the dynamic impact responses of CFRP header rail

Q Liu, Y Lu, J Jiang, X Yan, Q Li - Thin-Walled Structures, 2022 - Elsevier
The application of composite materials in vehicle thin-walled structure has attracted more
and more interest by carmakers. This study aimed to investigate into the dynamic impact …

Lateral crushing behavior of tubular lattice structures with triply periodic minimal surface architectures

L Wan, D Hu, M Wan, Z Yang, H Zhang, B Pi - Thin-Walled Structures, 2023 - Elsevier
Tubular lattice structures had attracted significant attention due to their remarkable
mechanical performance and lightweight, but there had been few research on their lateral …

An edge-computing framework for operational modal analysis of offshore wind-turbine tower

P Zhang, Z He, C Cui, C Xu, L Ren - Ocean Engineering, 2023 - Elsevier
With massive construction of offshore wind turbines (OWT), structural health monitoring
(SHM) techniques have been applied to estimate the working conditions and provide early …

Experimental and numerical study on the dynamic behavior of concrete-filled double steel tubular T-joint under impact loading

Q Yan, J Zhang, F Liu, Z Ma, G Zhao, C Gu, H Song… - Ocean …, 2023 - Elsevier
This study investigates the performance of T-joints in the jacket foundation of offshore wind
turbines under impact loading by means of experimental and simulation analysis. The …

Experimental and numerical investigation into tensile and cross tensile responses of CFRP/Al blind riveted-bonded hybrid joints

Y Lu, Q Liu, Z Zhang, L Qin, Q Li - Composite Structures, 2023 - Elsevier
The application of riveted-bonded hybrid joints between dissimilar materials in vehicle
structures has attracted increasing interest. This study aimed to investigate into the …

Experimental and numerical study on impact resistance of offshore wind turbine CFDST jacket

C Shi, J Zhang, F Liu, Z Ma, W Chen, H Xu, C Gu… - Engineering …, 2023 - Elsevier
With the development of large-scale offshore wind turbines (OWT), the jacket foundation
widely used to offshore wind turbines are at significant risk of collision damage from vessels …

Research on ship collision probability model based on Monte Carlo simulation and Bi-LSTM

S Vukša, P Vidan, M Bukljaš, S Pavić - Journal of marine science and …, 2022 - mdpi.com
The efficiency and safety of maritime traffic in a given area can be measured by analyzing
traffic density and ship collision probability. Maritime traffic density is the number of ships …

Dynamic compression and fracture of poly (ether-ether-ketone) under plate impact

BX Bie, RC Pan, J Xu, HW Chai, S Chen, GH Du… - International Journal of …, 2023 - Elsevier
Plate impact experiments are conducted to investigate shock compression and spallation
properties of poly (ether-ether-ketone)(PEEK) up to a peak shock stress of 2.5 GPa with high …