The boriding process is a branch of materials heating treatments that studies the
improvement of the mechanical properties in steels and alloys. Recently, the borided trends …

Iron-based superalloys are alloys produced for use in corrosive environments as an
alternative to high-cost nickel-based superalloys. However, their average strength and …

This study explores the transformative potential of boriding to enhance the tribocorrosion
resistance of mooring chain steel for offshore environments. The boride layers formed at …

This study investigated the characteristic properties of aluminizing, boronizing, and boro-
aluminizing coatings grown on Haynes 25 superalloys and their effects on the high …

In this study, SAE 1020 steel samples were boronized at 850° C for 4 h with different
boronizing mixtures by powder-pack boronizing method. H 3 BO 3 or Na 2 B 8 O 13 was …

In this study, the powder-pack boriding process on low-carbon stainless steel was carried
out at 1273 K for 4 h of exposure to obtain a layer around~ 57 μm conformed by FeB, Fe 2 B …

High-temperature metallic materials operate in environments with a broad spectrum of
mechanical and chemical conditions, originating typical failures such as steam oxidation, hot …

This study is dedicated to the detailed investigation of boronization kinetic, microstructural,
mechanical, and wear properties of high entropy alloys (HEAs) considering their sluggish …

The implementation of post-treatments for the enhancement of the mechanical behavior of
boride layers has been conducted in recent years. For this reason, the borided 8% Cr steel …

AISI 1040 grade steel is a commonly used steel in industry. In this study, pack boriding of
AISI 1040 steel was carried out in Ekabor-II powder at different temperatures (900° C and …