CrMnFeCoNi, a typical face-centered-cubic high-entropy alloy (HEA), was selected to
fabricate a dissimilar joint with 304 stainless steel by using Ag72Cu filler metal (FM) in a …

As-rolled and annealed CrMnFeCoNi high-entropy alloys (HEAs) were selected to braze
304 SS by using Ag50Cu as the filler metal (FM) in a vacuum furnace. Intergranular …

The joints of pure Cu and 304 stainless steel are widely used industrially as heat
exchangers. Brazing joints between pure Cu and 304 stainless steel using AgCuZnMnNi as …

In the present work, wetting behaviour of Ag–Cu eutectic filler on high nitrogen austenitic
stainless steel (HNS) and 316L austenitic stainless steel (316L) base metals was firstly …

A machine learning strategy is proposed based on the demand for prediction of solid-liquid
phase transition temperature properties of multi-component precious metal alloys. Firstly, the …

To broaden the utility of the CrCoNi medium entropy alloy in engineering applications, it is
imperative to conduct a comprehensive investigation into its soldering capabilities. This …

The inter-granular penetration inside CoCrMnFeNi high-entropy alloy (HEA) in the dissimilar
brazing joint of 304 stainless steel and this HEA were regulated for the first time by using …

The effect of Ni in Ag–Cu filler on the wetting and brazing characterization of stainless steel
was studied by means of wetting test and brazing test under high vacuum condition. The …

This study investigated a suitable filler metal, diffusion depth of the elements of this filler
metal in the base metal, and its effect on the mechanical properties of brazing bonding of …

The microstructure and properties of a Cu/304 stainless steel dissimilar metal joint brazed
with a low silver Ag16. 5CuZnSn-xGa-yCe braze filler after aging treatment were …