[HTML][HTML] Review on techniques to improve the strength of adhesive joints with composite adherends
X Shang, EAS Marques, JJM Machado… - Composites Part B …, 2019 - Elsevier
The use of adhesive joints has increased rapidly in the past decades. Driven by the growing
demand for lightweight structures, composite adherends have increased in popularity …
demand for lightweight structures, composite adherends have increased in popularity …
Strengthening of steel structures with fiber-reinforced polymer composites
Over the past two decades, fiber-reinforced polymer (FRP) composites have gradually
gained wide acceptance in civil engineering applications due to their unique advantages …
gained wide acceptance in civil engineering applications due to their unique advantages …
A review of finite element analysis of adhesively bonded joints
X He - International Journal of Adhesion and Adhesives, 2011 - Elsevier
The need to design lightweight structures and the increased use of lightweight materials in
industrial fields, have led to wide use of adhesive bonding. Recent work relating to finite …
industrial fields, have led to wide use of adhesive bonding. Recent work relating to finite …
[图书][B] FRP-strengthened metallic structures
XL Zhao - 2013 - books.google.com
This book covers the behavior and design of fiber-reinforced polymer strengthened metallic
structures based on existing international research. It outlines the applications, existing …
structures based on existing international research. It outlines the applications, existing …
The reduction of stress concentrations in adhesive joints with the use of curved aluminum adherends
VDC Pires, FCC Ribeiro, RJC Carbas… - Mechanics of …, 2023 - Taylor & Francis
The study proposes a novel concept of a curved single lap joint (SLJ) with non-uniform
adhesive thickness to reduce stress concentrations near overlap edges. Experimental and …
adhesive thickness to reduce stress concentrations near overlap edges. Experimental and …
Analysis of adhesive joints used to bond FRP laminates to steel members–A numerical and experimental study
R Haghani - Construction and building materials, 2010 - Elsevier
The strengthening of existing structures using bonded fiber reinforced polymer laminates
has attracted a great deal of attention in recent years. However, when compared with …
has attracted a great deal of attention in recent years. However, when compared with …
A new design model for adhesive joints used to bond FRP laminates to steel beams–Part A: Background and theory
R Haghani, M Al-Emrani - Construction and Building Materials, 2012 - Elsevier
The strengthening and repair of existing structures using bonded carbon fiber reinforced
polymer, CFRP, laminates has attracted a great deal of attention in the past two decades. A …
polymer, CFRP, laminates has attracted a great deal of attention in the past two decades. A …
Influence of boundary conditions on stress distributions in a single-lap adhesively bonded joint
X He - International Journal of Adhesion and Adhesives, 2014 - Elsevier
Increasing applications of adhesively bonded joints require understanding of the stress
distribution along the bond-line and the stresses that are responsible for the joint failure. The …
distribution along the bond-line and the stresses that are responsible for the joint failure. The …
Advances in resin matrix composite fan blades for aircraft engines: A review
J Wei, Y Zhang, Y Liu, Y Wang, C Li, Z Sun, H Xu… - Thin-Walled …, 2024 - Elsevier
In the past few decades, the development of aircraft engines has targeted high bypass ratios
and lightweight construction. The use of lighter and larger fan blades can facilitate the …
and lightweight construction. The use of lighter and larger fan blades can facilitate the …
Taper's angle influence on the structural integrity of single-lap bonded joints
The effect of conventional inside and outside tapers was addressed considering angles of
30°, 45° and 60°. The strain state of the joints was analyzed with an optical technique and …
30°, 45° and 60°. The strain state of the joints was analyzed with an optical technique and …