We study the nucleation of Mo-rich Laves phase particles during aging and creep of 12 wt.%
Cr tempered martensite ferritic steels (TMFS). Recently, in Isik et al.(2014) we reported that …

Materials in engineering applications are rarely uniaxially-loaded. In reality, failures under
multiaxial loading has been widely observed in engineering structures. The life prediction of …

This paper reports on the formation of an Mo-rich Laves phase during high-temperature
exposure and creep of a tempered martensite ferritic steel with 12 wt.% Cr and 1 wt.% Mo …

Aimed at evaluating the effectiveness of Zr and Hf additions on oxide particle refinement and
tensile strength improvement of transformable oxide dispersion strengthened (ODS) steels …

Effects of tungsten and tantalum contents on impact, tensile, low cycle fatigue and creep
properties of Reduced Activation Ferritic–Martensitic (RAFM) steel were studied to develop …

Creep strain versus time curves (creep curves) have traditionally been described with the
help of empirical models where a number of adjustable parameters are involved. These …

Stress rupture tests of normalized and tempered P92 (9Cr–0.5 Mo–1.8 W) steel were
performed in the range of 135–215 MPa at 650° C. Effect of tempering temperature in the …

Abstract Effect of thermo-mechanical processing on tensile behaviour of reduced activation
ferritic martensitic (RAFM) steel has been assessed and compared with those of the …

The precipitates obtained by EPE technology from the 9Cr-1.7 W-0.4 Mo-Co ferritic heat-
resistant steel subject to isothermal aging were investigated using SEM, TEM and XRD. The …

The mechanical properties and microstructure of reduced activation ferritic/martensitic
(RAFM) steel after austenitizing at 930–1080° C for 30 min and tempering at 760° C for 90 …