Deformation mechanisms and texture evolution in high entropy alloy during cold rolling
In the present study, equiatomic CoCrFeMnNi high entropy alloy (HEA) was subjected to
thickness reductions of 20, 40, and 60% during cold rolling in order to thoroughly investigate …
thickness reductions of 20, 40, and 60% during cold rolling in order to thoroughly investigate …
Study on microstructure evolution and deformation mechanism of Ti-6554 based on power dissipation efficiency at supertransus temperatures
C Li, L Huang, M Zhao, S Guo, J Li - Journal of Alloys and Compounds, 2022 - Elsevier
The microstructure evolution and deformation mechanism of a Ti-6Cr-5Mo-5 V-4Al (Ti-6554)
alloy during high temperature compression is investigated based on the power dissipation …
alloy during high temperature compression is investigated based on the power dissipation …
Hot compressive deformation behavior of Ti-8Al-1Mo-1 V titanium alloy at elevated temperatures: Focus on flow behavior, constitutive modeling, and processing maps
F Zarghani, GR Ebrahimi, J Taheri… - Materials Today …, 2023 - Elsevier
The deformation behavior of the near-α Ti-8Al-1Mo-1 V titanium (Ti-811) alloy was studied
by isothermal compression tests in the temperature range of 950–1075° C and strain rates of …
by isothermal compression tests in the temperature range of 950–1075° C and strain rates of …
Hot compressive deformation behavior of 7075 Al alloy under elevated temperature
The hot compression tests were conducted with wide strain rates and forming temperature
ranges to study the high-temperature deformation behavior of 7075 Al alloy. The material …
ranges to study the high-temperature deformation behavior of 7075 Al alloy. The material …
Experimental investigation on dynamic phase transformation and texture evolution of Ti55531 high strength titanium alloy during hot compression in the α+ β region
C Wu, L Huang, CM Li - Materials Science and Engineering: A, 2020 - Elsevier
This work aims to study the flow behavior, dynamic phase transformation (DPT) and texture
evolution of Ti55531 (Ti–5Al–5Mo–5V–3Cr–1Zr) alloy in the α+ β region. Hot compression …
evolution of Ti55531 (Ti–5Al–5Mo–5V–3Cr–1Zr) alloy in the α+ β region. Hot compression …
Constitutive analysis of the hot deformation behavior of Fe–23Mn–2Al–0.2 C twinning induced plasticity steel in consideration of strain
In this study, constitutive analysis has been carried out on Fe–23Mn–2Al–0.2 C twinning
induced plasticity (TWIP) steel. For this purpose, hot compression tests were conducted on a …
induced plasticity (TWIP) steel. For this purpose, hot compression tests were conducted on a …
Study on hot deformation behavior of AISI 414 martensitic stainless steel using 3D processing map
M Chegini, MR Aboutalebi, SH Seyedein… - Journal of Manufacturing …, 2020 - Elsevier
Hot deformation of AISI 414 martensitic stainless steel was studied over the temperature and
strain rate intervals of 950− 1150° C and 0.001 to 1 s− 1, respectively. Based on the …
strain rate intervals of 950− 1150° C and 0.001 to 1 s− 1, respectively. Based on the …
Hot working of Ti-6Al-4V with a complex initial microstructure
The hot deformation behaviour of wrought Ti-6Al-4V, with an initial microstructure of
equiaxed and elongated α phase and intergranular β, was investigated. Isothermal hot …
equiaxed and elongated α phase and intergranular β, was investigated. Isothermal hot …
Flow softening of 253 MA austenitic stainless steel during hot compression at higher strain rates
J Zhang, H Di, X Wang - Materials Science and Engineering: A, 2016 - Elsevier
The flow softening of 253 MA austenitic stainless steel was investigated by means of hot
compression tests performed over the temperature range of 900–1150° C. Constant true …
compression tests performed over the temperature range of 900–1150° C. Constant true …
[HTML][HTML] The temperature dependence of cyclic dynamic recrystallization in as-extruded pure zinc
The deformation characteristics of as-extruded pure zinc were studied over a wide
deformation temperature range from− 40° C to 300° C. Two-cycle dynamic recrystallization …
deformation temperature range from− 40° C to 300° C. Two-cycle dynamic recrystallization …