The growth of coarse columnar grains and dendritic ferrite is a common problem peculiar for
Cr–Ni steels produced by electron beam additive manufacturing. For these heterophase …

A billet of an AISI 304-type austenitic stainless steel has been built using a wire-feed
electron beam additive manufacturing (EBAM) in a layer-by-layer strategy. A microstructure …

We investigated the phase composition, microstructure, mechanical properties, and fracture
mechanisms of Nb-alloyed austenitic stainless steel, produced by electron beam additive …

Heat input for gas tungsten arc welding process was varied at three different levels to
fabricate three AISI 304L stainless steel welds to examine the influence of variable arc …

The present study investigates the microstructural changes and corrosion behavior of 13Cr
martensitic stainless steel (MSS), austenitized at 1040° C followed by cooling to room …

During vitrification of nuclear high level waste, the molten glass containing the waste oxides
is poured into 304L SS canisters at 1323 K (1050° C), which subsequently, cools through …

The effect of three levels of welding arc energy input on the metallurgical, mechanical, and
corrosion behavior of AISI 304L stainless steel was studied with the aim of investigating and …

In the present study, effect of welding current was analysed on the microstructural and
corrosion properties of 316L austenitic stainless steel (ASS) joints welded by gas tungsten …

Microstructural inhomogeneity of phase composition and grain structure of austenitic AISI
304-type stainless steel produced by wire-feed electron-beam additive manufacturing …

В ходе проделанной работы проведено исследование особенностей формирования
зеренной структуры и фазового состава во взаимосвязи с механическими …