Plasma nitriding of the Ti-6Al-4V alloy (TA) sample was carried out in a plasma reactor with
a hot wall vacuum chamber. For ease of comparison these plasma nitrided samples were …

The reactive cathodic arc deposition technique was used to produce Ti nitride and oxynitride
coatings on 304 stainless steel substrates (SS). Both mono (SS/TiN, SS/TiNO) and bilayer …

The beneficial effect of surface engineering on the wear and corrosion performance of Ti-6Al-
4V alloy for biomedical purposes has recently gained a lot of interest. To date, researchers …

In this work,(W, Ti) B 2 films with different stoichiometric ratio Ti/W deposited on silicon and
304 stainless steel by radio frequency magnetron sputtering are presented. The coatings …

Abstract Al–Zn–Si–RE coating with high Al content was deposited on mild steel by arc
spraying. The electrochemical behavior of Al–Zn–Si–RE coating in 3.5% NaCl solution was …

Nitride and carbide ternary coatings improve the wear and corrosion resistance of carbon
steel substrates. In this work, Ti-WN and Ti-WC coatings were deposited on AISI 1060 steel …

To improve the load-bearing capacity, hardness and adhesion strength of the TiN coatings,
the in situ plasma nitriding-PVD duplex treatment was applied. The substrate was pretreated …

To avoid the health risks of Cr 6+ in traditional Dacromet coatings, developing chromium-
free zinc-aluminum coatings attracts increasing attention in recent years. However, the state …

Nickel-TiN microcomposite coatings were successfully produced on copper substrate using
a nickel Watts bath containing TiN microparticles via a DC electrodeposition method. The …

In the present work, Titanium nitride (TiN) 150nm, Titanium on Titanium nitride (TiN 75nm/Ti
75nm), Titanium on Titanium carbonitride (TiCN 75nm/Ti 75nm), and Titanium on Titanium …