The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials
Most industrial alloys contain a matrix phase and dispersed second-phase particles. Several
thermomechanical processing (TMP) steps are usually needed to produce a final product …
thermomechanical processing (TMP) steps are usually needed to produce a final product …
[HTML][HTML] Effect of nanoparticles on creep behaviour of metals: a review
High-temperature resistant material is becoming increasingly significant in numerous
industrial applications, including aerospace and automotive use, to increase fuel efficiency …
industrial applications, including aerospace and automotive use, to increase fuel efficiency …
Stabilizing nanoprecipitates in Al-Cu alloys for creep resistance at 300 C
YH Gao, C Yang, JY Zhang, LF Cao, G Liu… - Materials Research …, 2019 - Taylor & Francis
ABSTRACT Commercial precipitation-hardened Al-Cu alloys are normally used at
temperatures below its ageing temperature of∼ 225° C, to avoid thermally induced …
temperatures below its ageing temperature of∼ 225° C, to avoid thermally induced …
Deformation mechanism during high-temperature tensile test in an eutectic high-entropy alloy AlCoCrFeNi2. 1
Y Zhang, X Wang, J Li, Y Huang, Y Lu, X Sun - Materials Science and …, 2018 - Elsevier
The deformation mechanism of an eutectic high-entropy alloy (EHEA) AlCoCrFeNi 2.1 at
elevated temperature has been studied by tensile test, microstructure analysis and …
elevated temperature has been studied by tensile test, microstructure analysis and …
Deformation microstructure and thermomechanical processing maps of homogenized AA2070 aluminum alloy
The hot deformation behavior of homogenized AA2070 Al–Li–Cu alloy was studied using
isothermal compression in a temperature range of 300° C–500° C and a strain rate range of …
isothermal compression in a temperature range of 300° C–500° C and a strain rate range of …
Precipitation hardening of 2024-T3 aluminum alloy during creep aging
Exposure of Al–Cu–Mg alloys to an elastic loading, either for “creep age forming” or other
manufacturing processes at relatively high temperature, will lead to microstructural changes …
manufacturing processes at relatively high temperature, will lead to microstructural changes …
Physically based constitutive analysis and microstructural evolution of AA7050 aluminum alloy during hot compression
S Wang, JR Luo, LG Hou, JS Zhang, LZ Zhuang - Materials & Design, 2016 - Elsevier
The hot compression tests of AA7050 aluminum alloy were conducted under conditions of
603–693 K and 0.001–10 s− 1, and the related microstructures were observed. Physically …
603–693 K and 0.001–10 s− 1, and the related microstructures were observed. Physically …
Effect of Mg microalloying on elevated-temperature creep resistance of Al–Cu 224 cast alloys
The influence of microalloying with Mg (0–0.36 wt%) on the elevated-temperature strength
and creep resistance of Al–Cu 224 cast alloys was investigated. The Mg-containing alloys …
and creep resistance of Al–Cu 224 cast alloys was investigated. The Mg-containing alloys …
[HTML][HTML] Dynamic precipitation and dynamic recrystallization behaviors of Mg-Gd-Nd-Zr magnesium alloy during thermal compression deformation
L Wang, A Jalar, L Dan - Journal of Materials Research and Technology, 2023 - Elsevier
In this paper, the dynamic precipitation and dynamic recrystallization (DRX) behaviors of Mg-
7Gd-2Nd-0.5 Zr (wt.%) alloy during thermal compression were investigated by optical …
7Gd-2Nd-0.5 Zr (wt.%) alloy during thermal compression were investigated by optical …
Effect of thermo-mechanically induced microstructural coarsening on the evolution of creep response of SnAg-based microelectronic solders
I Dutta, D Pan, RA Marks, SG Jadhav - Materials Science and Engineering …, 2005 - Elsevier
The creep response of solder joints in a microelectronic package, which are subjected to
aggressive thermo-mechanical cycling (TMC) during service, often limits the reliability of the …
aggressive thermo-mechanical cycling (TMC) during service, often limits the reliability of the …