Friction surfacing is a new variation of friction stir processing for surface property
modification of metallic substrates. There is an increasing body of literature about friction …

In the last decades, there has been an increase in the number of successful machine
learning models that have served as a key to identifying and using linkages within the …

AA5083 and AA5052 alloys were utilized as consumable rod and substrate, respectively, in
Friction Surfacing (FS) process and a three-dimensional finite element software known as …

Friction surfacing (FS), a solid-state joining process, is a coating technology for metallic
materials. Friction and plastic deformation enable the deposition of a consumable material …

Friction surfacing (FS) is a solid state coating technology for similar and dissimilar metallic
materials. The coating of the substrate with a consumable material is enabled due to …

The relationship between the cooling rate and microstructure evolution and the performance
improvement of an Al–4.5 wt% Cu alloy prepared using different casting methods was …

The present work investigated the fabrication of two-layered AA1050-AA2024 material by
friction surfacing process. The effect of rotational speed of a consumable rod was evaluated …

In this study, the effects of the traverse speed and the pre-heat treatment of the AA2024
consumable rod on the mechanical and microstructural properties of the friction surfaced …

Friction Surfacing (FS) of an AA2024 consumable rod was successfully conducted on an
AA1050 substrate. Moreover, ABAQUS was utilized, as a 3D finite element software, in order …

The present study aims to investigate the effect of friction surfacing parameters on the
mechanical properties and microstructure of coating fabricated by a solid solutionized …