In modern manufacturing environments, the quality assurance of machined parts has
attracted great attention from manufacturers. Surface finish and vibrations during turning …

In this research work turning operation is performed on AISI 1020 mild steel. Here we
conducted experiments by taking Cutting Speed, Feed Rate & Depth of cut as process …

Machining hard materials with 45–48 HRC is difficult in turning operation because of the
improvident cutting parameter selections for the operation. The OHNS (AISI/SAE‐01 …

Wear investigation has been conducted on mixed ceramic cutting tool (70% Al2O3+ 30%
TiC) when machining hardened AISI 52100 steel (66 HRC). Experimental planning method …

To neutralize the effect of cutting parameters, a combination of parameters such as cutting
speed, feed rate and depth of cut to be used in the experimental tests is selected from the …

During machining any material, vibrations play a major role in deciding the life of the cutting
tool as well as machine tool. The magnitude acceleration of vibrations is directly proportional …

The development of new materials and technologies also significantly affects traditional
methods of component production, as it forces companies to increase the efficiency of the …

In a machining process, self excited vibrations (chatter) take an important place in many
research works. In classic cases, with a massive workpieces, chatter vibrations occur when …

In this paper, an attempt is made to review the optimization of various parameters like
surface roughness, MRR and tool wear during turning operations on various steel grades …

In this research work, was made a study on the effects of turning conditions on incoloy 901
nickel-based superalloy and performed a precision analyzes using the Taguchi L27 …