High-velocity oxy-fuel (HVOF)-sprayed WC-10Co-4Cr coatings were deposited with
thickness of 150, 300 and 450 µm in the present work. The structural and mechanical …

Thermally sprayed WC-based hardmetal coatings offer high hardness, good sliding wear
and abrasion performance and find large applications in mechanical engineering, valve …

This research investigates the wear performance of WC-12Co and electroless Ni/WC-Co
deposits at high temperature. Dry sliding wear experiments were carried out for coated and …

The effect of heat treatment (300–950° C) on friction and abrasive wear behaviour of WC-
12Co and Cr 3 C 2–25NiCr coatings was investigated in the present work. The abrasive …

Fe-based coatings have been shown to be viable alternatives to the more expensive and
less environmentally friendly Co-and Ni-based coatings. In the present work, the …

The method of improving the properties of WC-Co thermally sprayed coatings by addition of
nanostructured reinforcement for mechanical strengthening was explored in this research …

There is an increasing demand to replace Co-based coatings with cheap and
environmentally friendly Fe-based coatings in corrosive environments. The main objective of …

Ceramics inherently shows resistance against corrosion and wear by owing tremendous
mechanical and thermal properties. Therefore, ceramics provide a solution to the various …

Abstract Cr 2 O 3-25TiO 2 coating was deposited by atmospheric plasma spray (APS)
coating technique. Effect of load (5–30 N) and sliding velocity (0.25, 0.75 ms− 1) on friction …

Diamond-like carbon (DLC) coating was used to improve the hardness and tribological
importance of the plasma nitrided Astaloy Mo. In this research, pre-alloyed Astaloy Mo and …